The driving on ways of this state, other than on the interstate and defense highway system as provided by RSA 266:18, of any vehicle or combination of vehicles exceeding the limitations of this section is hereby prohibited; provided, however, that any police officer shall allow on any way other than the interstate and defense highway system a tolerance of 5 percent above said limitations.
Table I.
Distance Between Extreme Axles in Feet | Maximum Gross Weight in Pounds |
25 | 54,500 |
26 | 55,500 |
27 | 56,000 |
28 | 57,000 |
29 | 57,500 |
30 | 58,500 |
31 | 59,000 |
32 | 60,000 |
Further provided that the maximum tire and axle gross weights as provided in paragraph I shall apply, and the maximum load in pounds carried on any group of 2 or more consecutive axles shall not exceed that produced by application of the weight formula as defined in subparagraph (h).
Table II.
Distance Between Extreme Axles in Feet | Maximum Gross Weight in Pounds |
28 | 60,500 |
29 | 61,500 |
30 | 62,000 |
31 | 62,500 |
32 | 63,500 |
33 | 64,000 |
34 | 64,500 |
35 | 65,500 |
36 | 66,000 |
37 | 66,500 |
38 | 67,500 |
39 | 68,000 |
Further provided that the maximum tire and axle gross weights as provided in paragraph I shall apply, and the maximum load in pounds carried on any group of 2 or more consecutive axles shall not exceed that produced by application of the weight formula as defined in subparagraph (h).
(In which W equals overall gross weight on any group of 2 or more consecutive axles to the nearest 500 pounds; L equals the distance measured to the nearest foot between the extreme of any group of 2 or more consecutive axles; and N equals the number of axles in the group under consideration.) Except that 2 consecutive sets of tandem axles may carry a gross load of 34,000 pounds each, provided the overall distance between the first and last axles of such consecutive sets of tandem axles is 36 feet or more and provided that such gross weight shall not exceed 80,000 pounds, including all law enforcement tolerances.
when expressed in tabular form results in maximum allowable load in pounds carried on any group of 2 or more consecutive axles as follows in table III.
Table III.
Distance* | 2 axles | 3 axles | 4 axles | 5 axles | 6 axles | 7 axles |
4 | 34,000 | |||||
5 | 34,000 | |||||
6 | 34,000 | |||||
7 | 34,000 | |||||
8 and less | 34,000 | 34,000 | ||||
more than 8 | 38,000 | 42,000 | ||||
9 | 39,000 | 42,500 | ||||
10 | 40,000 | 43,500 | ||||
11 | 44,000 | |||||
12 | 45,000 | 50,000 | ||||
13 | 45,500 | 50,500 | ||||
14 | 46,500 | 51,500 | ||||
15 | 47,000 | 52,000 | ||||
16 | 48,000 | 52,500 | 58,000 | |||
17 | 48,500 | 53,500 | 58,500 | |||
18 | 49,500 | 54,000 | 59,000 | |||
19 | 50,000 | 54,500 | 60,000 | |||
20 | 51,000 | 55,500 | 60,500 | 66,000 | ||
21 | 51,500 | 56,000 | 61,000 | 66,500 | ||
22 | 52,500 | 56,500 | 61,500 | 67,000 | ||
23 | 53,000 | 57,500 | 62,500 | 68,000 | ||
24 | 54,000 | 58,000 | 63,000 | 68,500 | 74,000 | |
25 | 54,500 | 58,500 | 63,500 | 69,000 | 74,500 | |
26 | 55,500 | 59,500 | 64,000 | 69,500 | 75,000 | |
27 | 56,000 | 60,000 | 65,000 | 70,000 | 75,500 | |
28 | 57,000 | 60,500 | 65,500 | 71,000 | 76,500 | |
29 | 57,500 | 61,500 | 66,000 | 71,500 | 77,000 | |
30 | 58,500 | 62,000 | 66,500 | 72,000 | 77,500 | |
31 | 59,000 | 62,500 | 67,500 | 72,500 | 78,000 | |
32 | 60,000 | 63,500 | 68,000 | 73,000 | 78,500 | |
33 | 64,000 | 68,500 | 74,000 | 79,000 | ||
34 | 64,500 | 69,000 | 74,500 | 80,000 | ||
35 | 65,500 | 70,000 | 75,000 | |||
**36 | 66,000 | 70,500 | 75,500 | |||
**37 | 66,500 | 71,000 | 76,000 | |||
**38 | 67,500 | 71,500 | 77,000 | |||
39 | 68,000 | 72,500 | 77,500 | |||
40 | 68,500 | 73,000 | 78,000 | |||
41 | 69,500 | 73,500 | 78,500 | |||
42 | 70,000 | 74,000 | 79,000 | |||
43 | 70,500 | 75,000 | 80,000 | |||
44 | 71,500 | 75,500 | ||||
45 | 72,000 | 76,000 | ||||
46 | 72,500 | 76,500 | ||||
47 | 73,500 | 77,500 | ||||
48 | 74,000 | 78,000 | ||||
49 | 74,500 | 78,500 | ||||
50 | 75,500 | 79,000 | ||||
51 | 76,000 | 80,000 | ||||
52 | 76,500 | |||||
53 | 77,500 | |||||
54 | 78,000 | |||||
55 | 78,500 | |||||
56 | 79,500 | |||||
57 | 80,000 |
* Distance in feet between the extremes of any group of 2 or more consecutive axles.
**Distance in feet between the extremes of 4 axles. (2 sets of 2 axles) 68,000 gross weight exception.
The permissible loads are computed to the nearest 500 pounds.
RSA 266:18-a
1983, 434:16. 1986, 121:3; 136:7. 1987, 404:21. 2008, 39 : 1 , eff. July 11, 2008. 2018, 74 : 3 , eff. July 24, 2018.