Section 1-7-509 - Electronic and electromechanical vote counting - testing of equipment required - rules(1)(a) An electronic or electromechanical voting system shall be tested at the conclusion of maintenance and testing. The tests shall be sufficient to determine that the voting system is properly programmed, the election is correctly defined on the voting system, and all of the voting system's input, output, and communication devices are working properly.(b) The designated election official shall conduct at least three tests on all electronic and electromagnetic voting equipment, including a hardware test, a public logic and accuracy test conducted in accordance with subsection (2) of this section, and a postelection test or audit conducted in accordance with rules promulgated by the secretary of state. Each type of ballot, including mail, provisional, and audio ballots, shall be tested in accordance with rules promulgated by the secretary of state. The tests must ensure that the equipment will correctly count the votes cast for all offices and on all ballot questions and ballot issues and that the voting system will accurately count ballots of all types.(c)(I) For all partisan elections, the designated election official shall select a testing board comprising at least two persons, one from each major political party, from the list provided by the major political parties pursuant to section 1-6-102.(II) For all nonpartisan elections, the designated election official or coordinated election official, as applicable, shall select a testing board comprising at least two persons who are registered electors.(2)(a) A public test of voting equipment shall be conducted prior to the commencement of voting in accordance with this section by processing a preaudited group of ballots produced so as to record a predetermined number of valid votes for each candidate and on each ballot question or ballot issue. The test shall ensure that the system accurately records votes when the elector has the option of voting for more than one candidate in a race. The test shall ensure that the voting system properly rejects and does not count overvotes and undervotes. If the equipment is to be used in an election using instant runoff voting, the test shall ensure that the voting system accurately records, counts, and tabulates an elector's rankings of multiple candidates in accordance with section 1-7-1003 and rules promulgated by the secretary of state.(b) The public test shall be open to representatives of the political parties, the press, and the public, subject to the rules promulgated by the secretary of state pursuant to subsection (6) of this section. Each major political party, minor political party, ballot issue committee that has an issue on the ballot, and coordinating entity may designate one person, who shall be allowed to witness all public tests and the counting of pretest votes. If an observer or designee hinders or disturbs the test process, the designated election official may remove the person from the test area. An observer or designee who has been removed from a public test may be barred from future tests. The absence of observers or designees shall not delay or stop the public test.(c) The testing board shall convene and designate at least one member to represent the board during the testing, sign the necessary reports, and report to the board. The programs and ballots used for testing shall be attested to and sealed by the board and retained in the custody of the designated election official. The absence of a member of the testing board shall not delay or stop the test.(d) Upon completion of the testing conducted pursuant to this section, the testing board or its representative and the representatives of the political parties, ballot issue committees, and coordinating entities who attended the test may witness the resetting of each device that passed the test to a preelection state of readiness and the sealing of each such device in order to secure its state of readiness.(e) The testing board or its representative shall sign a written statement indicating the devices tested, the results of the testing, the protective counter numbers of each device, if applicable, the number of the seal attached to each device upon completion of the testing, any problems reported to the designated election official as a result of the testing, and whether each device tested is satisfactory or unsatisfactory.(3) Notice of the fact that the public test will take place shall be posted in the designated public place for posting notices in the county for at least seven days before the public test. The notice shall indicate the general time frame during which the test may take place and the manner in which members of the public may obtain specific information about the time and place of the test. Nothing in this subsection (3) shall preclude the use of additional methods of providing information about the public test to members of the public.(4)(a) If any tested device is found to have an error in tabulation, it shall be deemed unsatisfactory. For each device deemed unsatisfactory, the testing board shall attempt to determine the cause of the error, attempt to identify and test other devices that could reasonably be expected to have the same error, and test a number of additional devices sufficient to determine that all other devices are satisfactory. The cause of any error detected shall be corrected, and an errorless count shall be made before the voting equipment is approved. The test shall be repeated and errorless results achieved before official ballots are counted.(b) If an error is detected in the operation or output of an electronic voting device, including an error in spelling or in the order of candidates on a ballot, the problem shall be reported to the testing board and the designated election official. The designated election official shall correct the error.(c) A voting device deemed unsatisfactory shall be recoded, repaired, or replaced and shall be made available for retesting unless a sufficient number of tested backup devices is available to replace the unsatisfactory device. The backup device may not be used in the election unless the testing board or its representative determines that the device is satisfactory. The designated election official shall announce at the conclusion of the first testing the date, place, and time that an unsatisfactory device will be retested, or, at the option of the testing board, the designated election official shall notify by telephone each person who was present at the first testing of the date, place, and time of the retesting.(5) The designated election official shall keep records of all previous testing of electronic and electromechanical tabulation devices used in any election. Such records shall be available for inspection and reference during public testing by any person in attendance. The need of the testing board for access to such records during the testing shall take precedence over the need of other attendees for access so that the work of the testing board will not be hindered. Records of testing shall include, for each device, the name of the person who tested the device and the date, place, time, and results of each test. Records of testing shall be retained as part of the official records of the election in which the device is used.(6) The secretary of state shall promulgate rules in accordance with article 4 of title 24 prescribing the manner of performing the logic and accuracy testing required by this section. On or before April 1, 2023, the rules promulgated in accordance with this subsection (6) must include standards and procedures for conducting logic and accuracy testing on voting equipment to be used in an election using instant runoff voting.Amended by 2021 Ch. 367, § 13, eff. 7/1/2022.Amended by 2013 Ch. 185, § 76, eff. 5/10/2013.L. 2005: Entire section added, p. 1404, § 27, effective June 6; entire section added, p. 1439, § 27, effective June 6. L. 2007: (1)(b) amended, p. 1779, § 17, effective June 1. L. 2010: (1)(c) amended, (HB 10-1116), ch. 833, p. 833, § 16, effective May 5. L. 2012: (1)(c)(III) added, (HB 12-1292), ch. 686, p. 686, § 31, effective May 17. L. 2013: (1)(b) amended, (HB 13-1303), ch. 723, p. 723, § 76, effective May 10. Subsection (1)(c)(III)(B) provided for the repeal of subsection (1)(c)(III), effective January 1, 2015. (See L. 2012, p. 686.)
In 2013, subsection (1)(b) was amended by the "Voter Access and Modernized Elections Act". For the short title and the legislative declaration, see sections 1 and 2 of chapter 185, Session Laws of Colorado 2013.