053-4 Wyo. Code R. § 75.701-3
For the purpose of grounding metallic frames, casings and enclosures of any electric equipment or device-receiving power from a direct-current power system with one polarity grounded, the following methods of grounding will be approved:
(a) A solid connection to the mine track;
(b) A solid connection to the grounded power conductor of the system;
(c) Silicon diode grounding; however, this method shall be employed only when such devices are installed in accordance with the requirements set forth in paragraph (d) of S 75.703-3; and
(d) Any other method, approved by an authorized representative of the Secretary, which insures that there is no difference in potential between such metal enclosures and the earth.
053-4 Wyo. Code R. § 75.701-3