Current through July 29, 2024
Section Trans 262.07 - Driver and operating requirements(1) The driver of a vehicle operating under a permit shall carry the permit in the vehicle to which [it] applies and shall have the permit available for inspection by any police officer, representative of the issuing authority, or person in charge of the maintenance of the highway being used.(2) The driver of a vehicle operating under a permit shall carry proof that transportation of an oversize or overweight load has been made to the origin of the backhaul movement or will be made from the destination of the backhaul movement. This proof may be a freight bill, a bill of lading, or similar document, or a signed order from the employer ordering the driver to transport a specific oversize load between specified locations.(3) The driver of a vehicle operating under a permit shall, whenever reasonable and practicable, maintain a distance of not less than 1,000 feet between the vehicle with the permit and any vehicle the driver is following, unless actually engaged in overtaking and passing another vehicle.(4) The driver of a vehicle operating under a permit shall allow traffic approaching or overtaking the permitted vehicle to pass, where it is safe to do so.(5) Unless a lower speed is specified in the permit, a vehicle operating under a permit may be operated at the posted speed limit.(6) The right wheels of the towed unit may not leave the roadway, except to allow traffic to pass.Wis. Admin. Code Department of Transportation § Trans 262.07
Cr. Register, December, 1990, No. 420, eff. 1-1-91.A "roadway" does not include paved or unpaved shoulders, s. 340.01(54), Stats.