Wash. Admin. Code § 296-807-15035

Current through Register Vol. 24-16, August 15, 2024

Section 296-807-15035 - Make sure the tool is appropriate to the job

(1) You must use the lowest velocity class of tool and load that will properly set the fastener.

(2) You must use the proper shield, fixture, adaptor, or accessory that is:

(a) Suitable for the job;

(b) Recommended and supplied by the manufacturer.

Wash. Admin. Code § 296-807-15035

Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015

Statutory Authority: RCW 49.17.010, [49.17].040,[49.17].050, and [49.17].060. 03-09-009, § 296-807-15035, filed 4/4/03, effective 8/1/03.