Wash. Admin. Code § 296-806-47004

Current through Register Vol. 24-16, August 15, 2024

Section 296-806-47004 - Safeguard nip points of roll-forming and bending machines

(1) You must safeguard in-running nip points on roll-forming and bending machines with at least one of the following:

(a) A point-of-operation guard or device.

(b) An emergency stop device.

(2) You must use an emergency stop device when a point-of-operation guard or device is not feasible.

Wash. Admin. Code § 296-806-47004

Amended by WSR 15-24-102, Filed 12/1/2015, effective 1/5/2016

Amended by WSR 20-03-154, Filed 1/21/2020, effective 2/21/2020

Statutory Authority: RCW 49.17.010, 49.17.040, 49.17.050, and 49.17.060. 04-14-028, § 296-806-47004, filed 6/29/04, effective 1/1/05.