Chapter 296-304 - Safety standards for ship repairing, shipbuilding and shipbreaking
- Section 296-304-010 - Scope and application
- Section 296-304-01001 - Definitions
- Section 296-304-01003 - Reference specifications, standards, and codes
- Section 296-304-01006 - Fire protection in shipyards
- Section 296-304-01007 - Fire safety plan
- Section 296-304-01009 - Precautions for hot work
- Section 296-304-01011 - Fire watches
- Section 296-304-01013 - Fire response
- Section 296-304-01015 - Hazards of fixed extinguishing systems on board vessels and vessel sections
- Section 296-304-01017 - Land-side fire protection systems
- Section 296-304-01019 - Training
- Section 296-304-01021 - Competent person
- Section 296-304-01023 - Appendix A - Model fire safety plan
- Section 296-304-020 - Confined and enclosed spaces and other dangerous atmospheres in shipyard employment
- Section 296-304-02001 - Reserved
- Section 296-304-02003 - Precautions and the order of testing before entering confined and enclosed spaces and other dangerous atmospheres
- Section 296-304-02005 - Cleaning and other cold work
- Section 296-304-02007 - Hot work
- Section 296-304-02009 - Maintenance of safe conditions
- Section 296-304-02011 - Warning signs and labels
- Section 296-304-02013 - Appendix B - Compliance assistance guidelines for confined and enclosed spaces and other dangerous atmospheres
- Section 296-304-02015 - Appendix C - Confined and enclosed spaces and other dangerous atmospheres in shipyard employment
- Section 296-304-030 - Surface preparation and preservation - Scope and application
- Section 296-304-03001 - Toxic cleaning solvents
- Section 296-304-03003 - Chemical paint and preservative removers
- Section 296-304-03005 - Mechanical paint removers
- Section 296-304-03007 - Painting
- Section 296-304-03009 - Flammable liquids
- Section 296-304-040 - Welding, cutting and heating - Scope and application
- Section 296-304-04001 - Ventilation and protection in welding, cutting and heating
- Section 296-304-04005 - Welding, cutting and heating in way of preservative coatings
- Section 296-304-04007 - Welding, cutting and heating of hollow metal containers and structures not covered by WAC 296-304-02003
- Section 296-304-04009 - Gas welding and cutting
- Section 296-304-04011 - Arc welding and cutting
- Section 296-304-04013 - Uses of fissionable material in ship-breaking, shipbuilding and ship repairing
- Section 296-304-050 - Scaffolds, ladders and other working surfaces - Scope and application
- Section 296-304-05001 - Scaffolds or staging
- Section 296-304-05003 - Ladders
- Section 296-304-05005 - Guarding of deck openings and edges
- Section 296-304-05007 - Access to vessels
- Section 296-304-05009 - Access to and guarding of dry docks and marine railways
- Section 296-304-05011 - Access to cargo spaces and confined spaces
- Section 296-304-05013 - Working surfaces
- Section 296-304-060 - General working conditions - Scope and application
- Section 296-304-06001 - Housekeeping
- Section 296-304-06002 - Sanitation
- Section 296-304-06003 - Illumination
- Section 296-304-06005 - Utilities
- Section 296-304-06007 - Work in confined or isolated spaces
- Section 296-304-06009 - Work on or in the vicinity of radar and radio
- Section 296-304-06011 - Work in or on lifeboats
- Section 296-304-06013 - Hazardous materials
- Section 296-304-06015 - First aid
- Section 296-304-06016 - Control of hazardous energy (lockout/tags-plus)
- Section 296-304-06017 - Retention of DOT markings, placards, and labels
- Section 296-304-06018 - Motor vehicle safety equipment, operation, and maintenance
- Section 296-304-070 - Gear and equipment for rigging and materials handling - Scope and application
- Section 296-304-07001 - Inspection
- Section 296-304-07003 - Ropes, chains and slings
- Section 296-304-07005 - Shackles and hooks
- Section 296-304-07007 - Chain falls and pull-lifts
- Section 296-304-07009 - Hoisting and hauling equipment
- Section 296-304-07011 - Use of gear
- Section 296-304-07013 - Qualifications of operators
- Section 296-304-080 - Tools and related equipment - Scope and application
- Section 296-304-08001 - General precautions
- Section 296-304-08003 - Portable electric tools
- Section 296-304-08005 - Hand tools
- Section 296-304-08007 - Abrasive wheels
- Section 296-304-08009 - Powder-actuated fastening tools
- Section 296-304-08011 - Internal combustion engines, other than ship's equipment
- Section 296-304-090 - Personal protective equipment (PPE)-General requirements
- Section 296-304-09001 - Hazard assessment and equipment selection
- Section 296-304-09003 - Training
- Section 296-304-09005 - Eye and face protection
- Section 296-304-09007 - Respiratory protection
- Section 296-304-09009 - Hearing protection
- Section 296-304-09011 - Head protection
- Section 296-304-09013 - Foot protection
- Section 296-304-09015 - Hand and body protection
- Section 296-304-09017 - Lifesaving equipment
- Section 296-304-09019 - Fall protection-General requirement
- Section 296-304-09021 - Personal fall arrest systems (PFAS)
- Section 296-304-09023 - Positioning device systems
- Section 296-304-100 - Ship's machinery and piping systems - Scope and application
- Section 296-304-10001 - Ship's boilers
- Section 296-304-10003 - Ship's piping systems
- Section 296-304-10005 - Ship's propulsion machinery
- Section 296-304-10007 - Ship's deck machinery
- Section 296-304-110 - Portable, unfired pressure vessels, drums and containers, other than ship's equipment - Scope and application
- Section 296-304-11001 - Portable air receivers and other unfired pressure vessels
- Section 296-304-11003 - Drums and containers
- Section 296-304-120 - Electrical machinery-Electrical circuits and distribution boards
- Section 296-304-130 - Gear certification - General provisions
- Section 296-304-13001 - Purpose and scope
- Section 296-304-13003 - Definitions of terms
- Section 296-304-140 - Procedure governing accreditation - Scope and application
- Section 296-304-14001 - Application for accreditation
- Section 296-304-14003 - Action upon application
- Section 296-304-14005 - Duration and renewal of accreditation
- Section 296-304-14007 - Criteria governing accreditation to certificate vessels' cargo gear
- Section 296-304-14009 - Voluntary amendment or termination of accreditation
- Section 296-304-14011 - Suspension or revocation of accreditation
- Section 296-304-14013 - Reconsideration and review
- Section 296-304-150 - Duties of persons accredited to certificate vessels' cargo gear - Scope and application
- Section 296-304-15001 - General duties-Exemptions
- Section 296-304-15003 - Recordkeeping and related procedures concerning records in custody of accredited persons
- Section 296-304-15005 - Recordkeeping and related procedures concerning records in custody of the vessel
- Section 296-304-160 - Certification of vessels' cargo gear - Scope and application
- Section 296-304-16001 - General
- Section 296-304-16003 - Initial tests of cargo gear and tests after alterations, renewals or repairs
- Section 296-304-16005 - Periodic tests, examinations and inspections
- Section 296-304-16007 - Heat treatment
- Section 296-304-16009 - Exemptions from heat treatment
- Section 296-304-16011 - Grace periods
- Section 296-304-16013 - Gear requiring welding
- Section 296-304-16015 - Damaged components
- Section 296-304-16017 - Marking and posting of safe working loads
- Section 296-304-16019 - Requirements governing braking devices and power sources
- Section 296-304-16021 - Means of derrick attachment
- Section 296-304-16023 - Limitations on use of wire rope
- Section 296-304-16025 - Limitations on use of chains
- Section 296-304-170 - Certification of vessels - Tests and proof loads - Heat treatment - Competent persons - Scope and application
- Section 296-304-17001 - Visual inspection before tests
- Section 296-304-17003 - Unit proof test-Winches, derricks and gear accessory thereto
- Section 296-304-17005 - Unit proof tests-Cranes and gear accessory thereto
- Section 296-304-17007 - Limitations on safe working loads and proof loads
- Section 296-304-17009 - Examinations subsequent to unit tests
- Section 296-304-17011 - Proof tests-Loose gear
- Section 296-304-17013 - Specially designed blocks and components
- Section 296-304-17015 - Proof tests-Wire rope
- Section 296-304-17017 - Proof tests after repairs or alterations
- Section 296-304-17019 - Order of tests
- Section 296-304-17021 - Heat treatment
- Section 296-304-17023 - Competent persons
- Section 296-304-180 - Accreditation to certificate shore-based equipment - Scope and application
- Section 296-304-18001 - Eligibility for accreditation to certificate shore-based material handling devices covered by chapter 296-56 WAC of the safety and health regulations for longshoring
- Section 296-304-18003 - Provisions respecting application for accreditation, action upon the application, and related matters
- Section 296-304-190 - Duties of persons accredited to certificate shore-based material handling devices-General duties, exemptions
- Section 296-304-200 - Certification of shore-based material handling devices - Scope and application
- Section 296-304-20001 - General provisions
- Section 296-304-20003 - Unit proof test and examination of cranes
- Section 296-304-20005 - Annual examination of cranes
- Section 296-304-20007 - Unit proof test and examination of derricks
- Section 296-304-20009 - Annual examination of derricks
- Section 296-304-20011 - Determination of crane or derrick safe working loads and limitations in absence of manufacturer's data
- Section 296-304-20013 - Safe working load reduction
- Section 296-304-20015 - Safe working load increase
- Section 296-304-20017 - Nondestructive examination
- Section 296-304-20019 - Wire rope
- Section 296-304-20021 - Heat treatment
- Section 296-304-20023 - Examination of bulk cargo loading or discharging spouts or suckers
- Section 296-304-20025 - Documentation