Utah Admin. Code 649-3-22

Current through Bulletin 2024-17, September 1, 2024
Section R649-3-22 - Completion Into Two or More Pools
1. The completion of a single well into more than one pool may be permitted by submitting an application to the division and securing its approval.
1.1. The application shall be submitted on Form 9, Sundry Notice and Report and shall be accompanied by an exhibit showing the location of any well on contiguous oil and gas leases or drilling units overlying the pool.
1.2. The application shall set forth any material facts involved and the manner and method of completion proposed.
2. If oil or gas is to be produced from two or more pools open to each other through the same string of casing so that commingling will take place, the application must also be accompanied by a description of the method used to account for and to allocate production from each pool so commingled.
3. The application shall include an affidavit showing that the operator has provided a copy of the application to the owners of any contiguous oil and gas leases or drilling units overlying the pool.
3.1. If none of these owners file a written objection to the application within 15 days after the date the application is filed with the division, the application may be considered and approved by the division without a hearing.
3.2. If a written objection is filed that cannot be resolved administratively, the application may be approved only after notice and hearing by the board.

Utah Admin. Code R649-3-22

Amended by Utah State Bulletin Number 2020-15, effective 7/27/2020