Section R156-22-302i - Qualifications for Licensure - Examination Requirements for Professional Structural Engineer In accordance with Subsection 58-22-302(2)(f), the examination requirements for licensure as a professional structural engineer are defined, clarified, or established as the following:
(1) the NCEES FE examination with a passing score as established by the NCEES; and one of the following: (a) the NCEES SE examination with a passing score as established by the NCEES;(b) the NCEES Structural I and Structural II Examinations with a passing score as established by the NCEES;(c) an equivalent 16-hour state written examination with a passing score; or(d) the NCEES Structural II exam and an equivalent 8-hour state written examination with a passing score.(2) Prior to registering directly with NCEES to sit for the NCEES SE examination, an applicant shall: (a) complete two out of the three years of the experience requirements set forth in Subsection R156-22-302f; and(b) provide verification to NCEES of passing the NCEES FE examination.(3) An applicant for licensure as a professional structural engineer by endorsement shall comply with the examination requirements in Subsection R156-22-302i, except that the Board may waive the NCEES FE examination for an applicant who: (a) has been a principal for five of the last seven years preceding the date of the license application; and(b) was not required to pass the NCEES FE examination for initial licensure from the recognized jurisdiction the applicant was originally licensed.Utah Admin. Code R156-22-302i
Adopted by Utah State Bulletin Number 2017-18, effective 8/21/2017