Statutes, codes, and regulations
Pennsylvania Code (Rules and Regulations)
Title 67 - TRANSPORTATIONPart I - Department of TransportationSubpart A - Vehicle Code ProvisionsArticle VII - Vehicle CharacteristicsChapter 175 - VEHICLE EQUIPMENT AND INSPECTIONSubchapter O - VEHICLE SUN SCREENING DEVICES
LOCATION OF REQUIRED EQUIPMENT
LOCATION OF REQUIRED EQUIPMENT

Pa. Code tit. 67, pt. I, subpt. A, art. VII, ch. 175, subch. O, TABLE V

Download
PDF
Current through Register Vol. 54, No. 50, December 14, 2024
LOCATION OF REQUIRED EQUIPMENT

MOTORCYCLES

ITEMLOCATION ON MOTORCYCLESHeight above road surface measured from center of item on vehicle
Turn Signal LampsAt or near the front 1 amber on each side of the vertical centerline at the same height, and having a minimum horizontal separation distance (centerline of lamps) of 16". Minimum edge to edge separation distance between lamp and headlamp is 4". Not less than 15" nor more than 83"
At or near the rear 1 red or amber on each side of the vertical centerline, at the same height and having a minimum horizontal separation distance (centerline to centerline of lamps) of 9". Minimum edge to edge separation distance between lamp and tail or stop lamp is 4".

Pa. Code tit. 67, pt. I, subpt. A, art. VII, ch. 175, subch. O, TABLE V

The provisions of this Table V readopted December 2, 1988, effective 12/3/1988, 18 Pa.B. 5362

This table cited in 67 Pa. Code § 175.146 (relating to lighting and electrical systems); 67 Pa. Code § 175.160 (relating to inspection procedure); 67 Pa. Code § 175.175 (relating to lighting and electrical systems); and 67 Pa. Code § 175.190 (relating to inspection procedure).