Current through Register Vol. 54, No. 44, November 2, 2024
Section 33.115 - Pennsylvania license to carry firearms(a) The Pennsylvania license to carry firearms (as defined in section 6102 of the act (relating to definitions)) form, shall be constructed as a three-part form, 3 inches by 5 3/8 inches in dimension, on white paper. The issuing authorities, that is, county sheriff or a chief of police for a city of the first class, shall utilize the form as prescribed by the State Police.(b) The Pennsylvania license to carry firearms (as defined in section 6102 of the act) shall be typewritten, computer generated or printed in blue or black ink with a ballpoint pen. Copies shall contain legible impressions. A photograph of the applicant may be placed on the license if required by the issuing authority.(c) The form is designed to be folded in half and may be laminated. At the option of the entity furnishing the form, the paper weight of each part may be a minimum of 14 pounds up to a maximum of 28 pounds, and impressions may be produced by utilizing either carbon inserts or no carbon required (NCR) paper. Forms shall be numbered in numerical sequence and the size of the license numbers shall be at least 3/16 of an inch. The first two numbers shall be the county location code followed by the license number-for example, if the license was issued by Dauphin County, the license number would be 22-0000001, and so on.(d) Under section 6109 of the act (relating to licenses), the original shall be issued to the licensee and be valid for 5 years from date of issue, unless revoked sooner. The first copy shall be transmitted by the issuing authority within 7 business days by first class mail to the State Police, Attention: Firearm Unit, 1800 Elmerton Avenue, Harrisburg, Pennsylvania 17110. The second copy shall be retained by the issuing authority for 6 years.The provisions of this §33.115 adopted February 23, 2001, effective 2/24/2001, 31 Pa.B. 1145.