Or. Admin. R. 918-261-0039

Current through Register Vol. 63, No. 8, August 1, 2024

Section 918-261-0039 - Exemption for Products Located on the Load Side of a Listed Class 2 Transformer

(1) An exemption from product certification is granted under ORS 479.540 for installation of Class 2 products, other than wiring, located on the load side of a listed Class 2 transformer. The exemption applies only to products that are not:

(a) In a damp or wet location;

(b) Located in a plenum, duct or other air-handling space;

(c) Located in any area from chapter 5 of the adopted Oregon Electrical Specialty Code; or

(d) Part of a protective signaling system.

(2) An exemption from permitting is created for installation of Class 2 wiring located on the load side of a listed garage door controller. The exemption applies only to one- and two-family dwellings when the wiring is not part of the original wiring of the dwelling.

Or. Admin. R. 918-261-0039

BCD 4-2004, f. 3-31-04, cert. ef. 4-1-04

Publications: Publications referenced are available from the agency.

Stat. Auth.: ORS 479.540

Stats. Implemented: ORS 479.540