Or. Admin. Code § 735-022-0040

Current through Register Vol. 63, No. 10, October 1, 2024

Section 735-022-0040 - Manufacturer's Certificate of Origin (MCO) Form and Content

(1) An MCO must be issued by the vehicle's manufacturer or the manufacturer's authorized representative and must include the following:

(a) The name of the manufacturer;

(b) The vehicle year model, make and VIN;

(c) The name of the franchised dealer, distributor or purchaser to whom interest has been assigned; and

(d) The signature of the manufacturer.

(2) In addition to the requirements described in section (1) of this rule, an MCO issued for a vehicle manufactured in multiple stages, for example, a vehicle manufactured as a kit or glider kit, must include assignments of interest for each stage of manufacture. In addition, the MCO must:

(a) Contain the vehicle year model, if the MCO is from the final stage manufacturer; or

(b) Indicate the vehicle is incomplete and identify what portion of the vehicle is covered by the MCO.

(3) An MCO issued for a glider kit must identify that the MCO is for a kit or glider kit and contain at least the following:

(a) The name of the glider kit manufacturer;

(b) The glider kit year model, make and VIN; and

(c) The name of the party to whom interest has been assigned.

(4) If the MCO does not contain the required information, DMV may:

(a) Require further documentation;

(b) Refuse to issue title; or

(c) Both subsections (a) and (b) of this section.

Or. Admin. Code § 735-022-0040

MV 6-1987, f. & ef. 6-17-87; Administrative Renumbering 3-1988, Renumbered from 735-090-0510; DMV 11-2005, f. 4-25-05, cert. ef. 5-1-05; DMV 16-2006, f. & cert. ef. 11-17-06

Stat. Auth.: ORS 802.010, 803.045, 803.050

Stats. Implemented: ORS 803.045