Section 74-06-02-04 - TypeThe type shall be designated by size, large or small, determined by sizing using an 8/64 x 3/4 slotted sieve, and shall be added to and become part of the grade name, e.g.. No. 1 North Dakota Large.
1. The designation is large when at least eighty percent of the buckwheat remains on top an 8/64 x 3/4 slotted sieve. The designation is small when over twenty percent of the buckwheat passes through an 8/64 X 3/4 slotted sieve. 2. The determination of type shall be by a manual or mechanical method. a. For the manual method, a representative portion of two hundred fifty grams of the cleaned sample is sized using an 8/64 x 3/4 slotted hand sieve nested over a blank tray. The sample is placed on the sieve and shaken lengthwise of the slots for twenty strokes, a stroke being about twenty centimeters back and forth. b. For the mechanical method, a representative portion of two hundred fifty grams of the cleaned sample is sized over the Carter dockage tester as follows: | Air - off | Top section - (8/64 x 3/4) slotted sieve |
| Feed - # 6 | Center section - Blank tray |
| Riddle - nil | |
The machine is turned off only after the sample has passed over the sieve.
NOTE: All buckwheat passing through an 8/64 x 3/4 slotted sieve shall be weighed and percentage determined.
N.D. Admin Code 74-06-02-04
Effective September 1, 1979.General Authority: NDCC 4.1-53-11(6)
Law Implemented: NDCC 4.1-53-11(6)