Statutes, codes, and regulations
New York Codes, Rules and Regulations
Title 12 - DEPARTMENT OF LABORChapter I - Industrial Board Of AppealsSubchapter A - The Industrial CodePart 23 - Protection In Construction, Demolition And Excavation Operations
Subpart 23-5 - Scaffolding
Section 23-5.14 - Bricklayers' square scaffolds

N.Y. Comp. Codes R. & Regs. Tit. 12 §§ 23-5.14

Download
PDF
Current through Register Vol. 46, No. 51, December 18, 2024
Section 23-5.14 - Bricklayers' square scaffolds
(a)Limitation of use.

Bricklayers' square scaffolds shall not be used as heavy duty scaffolds.

(b)Construction of squares.
(1) The squares of bricklayers' square scaffolds shall not exceed five feet in width by five feet in height. The minimum sizes of members shall not be less than those specified in Table XIV of this Subpart.

TABLE XIV MINIMUM SPECIFICATIONS OF BRICKLAYERS' SQUARE SCAFFOLDS

MembersDimensions
Bearers or horizontal members ....... 2" × 6"
Legs ....... 2" × 6"
Braces at corners ....... 1" × 6"
Braces diagonally from center frames ....... 1" × 6"

(2) Such squares shall be reinforced on both sides of each corner with gusset braces at least one inch thick. Each square shall be provided with braces at least one inch by eight inches in size on both sides. Such braces shall extend from the center of each member to the center of the adjacent member or shall be otherwise arranged to secure rigidity of the square.
(c)Construction of scaffolding.

The squares shall be set not more than five feet apart for medium duty scaffolds and not more than eight feet apart for light duty scaffolds. One inch by eight inch diagonal bracing extending from the bottom of one square to the top of the next adjacent square shall be provided on both the front and back of every bricklayers' square scaffold.

(d)Scaffold platforms.

The platform planks used for such scaffolds shall be not less than two inches in thickness, full size. The ends of the planks shall overlap on the backs of the squares and each such plank shall be supported by not less than three squares. Such planks shall extend beyond the edges of the squares by not less than six inches nor more than 18 inches.

(e)Multiple tiers.

Bricklayers' square scaffolds shall not be constructed with more than three tiers. When erected in tiers, such scaffolds shall be so constructed that the squares are directly one above the other. The upper tiers shall stand on continuous rows of planks laid across the next lower tier and shall be nailed securely or otherwise secured so as to prevent displacement. Such scaffolds shall be erected on level and firm foundations equivalent to that afforded by two-inch by nine-inch planking.

N.Y. Comp. Codes R. & Regs. Tit. 12 §§ 23-5.14