Section Lan 305.03 - Licensed Land Surveyor Seal/Stamp(a) Upon issuance of a license to an applicant as a licensed land surveyor, the licensee shall obtain an impression type seal or rubber stamp of the design specified by these rules. This seal shall bear the licensee's name and number as shown on the license. This seal and original signature shall be affixed on all final plans and reports of survey prepared by the licensee.(b) The seal shall consist of 2 squares with the outer square 1-9/16 inches and the inner square 1-1/2 inches. In the space inside the inner square shall be a transit within the full name of the licensee and the license number written horizontally. On the left side of the transit the words "State of New Hampshire shall appear, and on the right side of the transit the words "Licensed Land Surveyor." At the bottom of the stamp there shall be a line for the licensee's signature pursuant to figure 306-1. Figure 306-1 Land Surveyor Seal
Click here to view Image
(c) It shall be a violation of these rules for the licensee to stamp or seal any documents with the licensee's seal after the license has expired or been revoked, or while the license is under suspension. It shall be a violation of these rules for the licensee to stamp or seal any document not prepared by the licensee personally or under the licensee's direct supervision.N.H. Admin. Code § Lan 305.03
#1876, eff 12-3-81; ss by #3030, eff 5-28-85; ss by #5555, eff 1-15-93; ss by #5934, eff 12-9-94, EXPIRED: 12-9-00
New. #7425, INTERIM, eff 1-13-01, EXPIRED: 7-12-01
New. #7549, eff 8-25-01; ss by#9340, eff 1-1-09
Amended by Volume XXXVI Number 45, Filed November 10, 2016, Proposed by #12031, Effective 11/1/2016, Expires 11/1/2026.