Section 534A.280 - Measurements of temperature1. The temperature of the mud that is returned up the well bore must be observed continuously by the operator during the drilling of the well whenever temperatures of the drilling fluids at the surface reach 125°F. These temperatures must be entered into the well log after each joint of pipe has been drilled.2. Mud cooling equipment is required when the flow line temperature reaches 125°F.Nev. Admin. Code § 534A.280
Added to NAC by Comm'n on Mineral Resources, eff. 11-12-85; A 8-22-94; A by R032-19A, eff. 12/16/2019