Section 110-6-5 - Technical Submissions6.5.1 Technical submissions that constitute the practice of architecture or engineering shall include both (1) the name, and (2) either the address or location, of the project on each drawing and the cover page and/or first page of specifications, reports, studies, and other documents:6.5.2 If the work shown on technical submissions is not being performed through an organization as provided in Neb. Rev. Stat. § 81-3436, the licensee's (1) name and (2) contact information shall be included on technical submissions.6.5.3 If the work shown on technical submissions is being performed through an organization or organizations as provided in Neb. Rev. Stat. § 81-3436, (1) the organization(s) legal name or DBA, (2) contact information, and (3) the organization(s) certificate of authorization number(s) shall be included on technical submissions.6.5.4 If sealed standards such as drawings, details, and specifications prepared by a jurisdiction are used in a project, the name of the jurisdiction which prepared the standards shall be noted on the technical submissions.110 Neb. Admin. Code, ch. 6, § 5
Adopted effective 10/8/2022Amended effective 3/16/2024