Minn. R. agency 151, ch. 1350, APPROVALS, pt. 1350.1400

Download

PDF

Current through Register Vol. 49, No. 19, November 4, 2024

Part 1350.1400 - APPLICATION FOR MANUFACTURED HOME ACCESSORY STRUCTURE APPROVAL

Subpart 1.Contents; generally.

An application for a manufactured home accessory structure approval shall contain the following:

A. name and address of manufacturer;

B. location of plant where manufacture will take place;

C. identification of plans, specifications, or other documents being submitted; and

D. identification of approved quality control procedures and manual.

Subp. 2.Plans and specifications.

Submissions of required plans and specifications shall be in duplicate and shall include, but not be limited to, the following:

A. a dimensioned floor plan(s);

B. proposed use of rooms and method of light and ventilation;

C. size, type, and location of windows and exterior doors;

D. type and location of all appliances and fixtures;

E. type, size, and location of plumbing, drain, water, gas, and electrical connections;

F. type and location of all electrical outlets (receptacles and lights);

G. number of outlets and appliances on each circuit and circuit rating;

H. installation details and instructions for accessory structures;

I. mechanical layout for heating or cooling;

J. heating and cooling load calculations;

K. structural calculations;

L. engineered truss drawings or rafter calculations; and

M. approval letter from home manufacturer allowing addition of accessory structure for new manufactured homes subject to the limited warranty of merchantability and fitness.

Minn. R. agency 151, ch. 1350, APPROVALS, pt. 1350.1400

24 SR 1846; 34 SR 866

Statutory Authority: MS s 326B.02; 326B.101; 326B.106; 326B.13; 327.32; 327.33; 327B.01 to 327B.12