Mich. Admin. Code R. 408.12444

Current through Vol. 24-19, November 1, 2024

Section R. 408.12444 - Inch control

Rule 2444. The "inch" operating means shall be designed to prevent exposure of the worker's hands within the point of operation by either of the following:

(a) Requiring the concurrent use of both hands to actuate the clutch.

(b) Being a single control protected against accidental actuation and so located that the worker cannot reach into the point of operation while operating the single control.

Mich. Admin. Code R. 408.12444

1979 AC