Mich. Admin. Code R. 408.11118

Current through Vol. 24-19, November 1, 2024

Section R. 408.11118 - Flanges

Rule 1118.

(1) A flange shall be used with a metal or fibre center bias buff, except where the flange is an integral part of the buff.

(2) A flange shall:

(a) Be 3/16 inch thick for buff face up to 6 inches wide and 3/8 inch thick for a wider buff face.

(b) Be of a diameter to bear firmly on the clinch ring.

(c) Be of the same diameter and design of both sides.

(d) Be made of steel or material of equal strength.

(3) A flange should be tapered or bell shape instead of flat. See figure 3.

Mich. Admin. Code R. 408.11118

1979 AC