La. Admin. Code tit. 55 § III-1128

Current through Register Vol. 50, No. 9, September 20, 2024

Section III-1128 - Identification and Labeling Eye Protection Devices

A. Eye protection devices, manufactured to comply with the requirements of these regulations, shall be identified and labeled as follows.

1. The following information shall be permanently marked on the structure and on each lens of the EPD in a manner not to interfere with the vision of the wearer:

a. that the device meets §1125 of these regulations;

b. the manufacturer's or distributor's trade name and model name or number, which shall correspond with the name and number under which the device has been approved or certified. On the lens itself, the manufacturer's identifying monogram or symbol shall be sufficient;

c. on an tinted EPD, the wording "day use only" shall appear.

B. The information required under §1128. A.1 plus the corporate or business name and address of either the actual manufacturer or marketer assuming the responsibilities of the manufacturer shall be imprinted on the container in which the EPD is packed and on any instruction sheet(s) pertaining to the EPD.

C. The following statement shall appear in a prominent location on the container or label accompanying each tinted eye protection device: The tinted eye protection device is for daytime use only. Words of equivalent meaning may be substituted.

La. Admin. Code tit. 55, § III-1128

Promulgated by the Department of Public Safety and Corrections, Office of State Police, LR 27:68 (January 2001).

AUTHORITY NOTE: Promulgated in accordance with R.S. 32:190.