La. Admin. Code tit. 55 § III-1107
Current through Register Vol. 50, No. 9, September 20, 2024
Section III-1107 - ConfigurationA. Each helmet shall have a protective surface of continuous contour at all points on or above the test line described in §1113. C The helmet shall provide peripheral vision clearance of at least 105° to each side of the mid-sagittal plane, when the helmet is adjusted as specified in §1114 The vertex of these angles, shown in §1131. D Figure 3, shall be at the point on the anterior surface of the reference headform at the intersection of the mid-sagittal and basic planes. The brow opening of the helmet shall be at least 1 inch (2.5 cm) above all points in the basic plane that are within the angles of peripheral vision (see §1131. D Figure 3).La. Admin. Code tit. 55, § III-1107
Promulgated by the Department of Public Safety and Corrections, Office of State Police, LR 27:62 (January 2001).AUTHORITY NOTE: Promulgated in accordance with R.S. 32:190.