Current through Register Vol. 43, No. 45, November 7, 2024
Section 28-19-544 - Class II operating permits; modification of source or operations(a) Any stationary source operating pursuant to a class II operating permit shall not modify the stationary source in any manner which increases the potential-to-emit of any pollutant included in the categories listed at K.A.R. 28-19-500 without first obtaining a written approval from the department authorizing such modification pursuant to K.A.R. 28-19-300 et seq., construction permits and approvals. (b) The owner or operator of a stationary source shall submit to the department a complete application for modification of a class II operating permit, including any applicable application fee, within 180 days of the initial startup of any modification if the modification increases the potential-to-emit of the stationary source. (c) The application for modification shall be in writing and made on forms provided or approved by the department. (d) An application for modification of a class II operating permit shall be accompanied by: (1) sufficient information for the department to determine the potential-to-emit of the stationary source; (2) any air pollution control equipment maintenance plan required by the provisions of K.A.R. 28-19-501; (3) any proposed operational restrictions which would reduce the potential-to-emit of the stationary source, including: (A) specification of any proposed operating restrictions; (B) proposed methods for quantifying such restrictions; and (C) proposed methods for monitoring such restrictions; and (4) the appropriate application fee. (e) The owner or operator of the source shall provide any additional information requested by the department. (f) The application shall be certified by a responsible official. Kan. Admin. Regs. § 28-19-544
Authorized by K.S.A. 1993 Supp. 65-3005; implementing K.S.A. 1993 Supp. 65-3008; effective Jan. 23, 1995.