Section 39.02.09.200 - CERTIFICATE CONTENTS01.MCO Content Requirements. Each MCO accompanying application for title will contain the following information: (3-31-22) b. Invoice number and document control number; (3-31-22)c. Name of distributor or dealer; (3-31-22)d. Issuing location - city and state; (3-31-22)e. Manufacturer's name and signature of authorized manufacturer's representative; (3-31-22)f. Manufacturer statement - "I, the undersigned authorized representative of the company, firm or corporation named below, hereby certify that the new vehicle described above is the property of the said company, firm or corporation and is transferred on the above date and under the Invoice Number indicated to the following distributor or dealer"; (3-31-22)g. Year, make, body type, series or model; (3-31-22)h. Vehicle identification number, approved by the American Society of Automotive Engineers; (3-31-22)i. Shipping weight, horsepower (SAE) and number of cylinders when applicable, Gross Vehicle Weight Rating (GVWR); and (3-31-22)j. Certification attesting to the first transfer in ordinary trade or commerce: "It is further certified that this is the first transfer of such new vehicle in ordinary trade and commerce." (3-31-22)02.Additional Motor Home Requirements. If the vehicle is a motor home, the following statement will be included: "The undersigned certifies that the vehicle described hereon is a motor home, equipped with at least four (4) of the following life support systems: cooking, refrigeration or ice box, self-contained toilet, heating and/or air conditioning, a potable water supply system including a faucet and sink, separate 110-115 volt electrical power supply and/or an LP as supply, all of which meet ANSI A119.2 standards." (3-31-22)03.MCO Assignments and Reassignments. The reverse side of the certificate will provide for distributor/dealer assignments and reassignments. (3-31-22)Idaho Admin. Code r. 39.02.09.200