Idaho Admin. Code r. 37.03.02.045

Current through September 2, 2024
Section 37.03.02.045 - DRAWINGS, MAP, AND SCHEMATIC DIAGRAM

The following provisions shall apply to the submittal of drawings, maps, photos and the schematic diagrams.

01.Submittal of Drawings, Maps, Photos and Schematic Diagrams. Drawings, maps, photos and schematic diagrams used as an attachment to the field report shall be on eight and one-half by eleven (8 1/2 x 11) inch paper whenever possible.
02.Attachment Sheets. Attachment sheets shall depict information on one (1) side only.
03.Scale of Map. The map depicting the point of diversion and place of use shall be of a reasonable scale but not less than two (2) inches equals one (1) mile. The map shall show the location of the point(s) of diversion to the nearest forty (40) acre tract or to a ten (10) acre tract for springs. The location of ditches, canals, mainlines, distribution systems and the place of use by forty (40) acre tract must be shown.
04.Drawings. Drawings need to generally depict the size and type of diversion works, measuring device, conveyance system, water application method, and the location of any measurements taken.
05.Photographs. Photographs of the diversion works, the typical distribution works and other prominent features of the system shall be provided with the field report.

Idaho Admin. Code r. 37.03.02.045

Effective March 18, 2022