Section 19-135-24 - Failure to qualify for certification and correction of defects(a) When a moped fails to pass an inspection for certification in accordance with this chapter, a failure notice shall be issued and the authorized sticker shall not be affixed to the moped.(b) A copy of the failure notice, shall be given to the applicant if the moped fails inspection, so that corrective repairs may be done on the moped. When, upon reinspection, the moped is found to be in safe operating condition, the certificate of inspection shall be issued and a sticker affixed to the moped in accordance with this chapter.(c) If the applicant refuses to have the corrective repairs done immediately, no certificate of inspection shall be issued by the inspector, but a copy of the failure notice shall be given to the applicant. The applicant shall have thirty days to correct all the deficiencies and return to the station for reinspection at no additional cost.(d) If, after corrective repair within the thirty-day period, the moped is found to qualify for certification, the certificate of inspection shall be completed and signed by the safety inspector and issued to the applicant and a sticker affixed to the moped in accordance with this chapter. No additional fee shall be charged.(e) This section does not authorize anyone to operate a moped on the public highways without a valid certificate of inspection or with an expired certificate.[Eff SEP 15 1986] (Auth: HRS § 291C-202) (Imp: HRS § 291C-202)