As used in this chapter:
"Certified moped inspector" or "inspector" means a person who possesses a current, valid, moped inspector certificate issued by the county agency.
"Clockwise" and "counterclockwise" mean opposing directions of rotation around the following axes, as applicable:
(1) The operational axis of the ignition control, viewed from in front of the ignition lock opening;
(2) The axis of the right handlebar on which the twist-grip throttle is located, viewed from the end of that handlebar; or
(3) The axis perpendicular to the center of the speedometer when viewed from the operator's normal eye position.
"County agency" means the county department designated by the county council as the department having the responsibility for supervising and administering the periodic moped inspection program in that county.
"Director" means the director of the state department of transportation.
"Electronic inspection form" means a computerized inspection form that lists the components to be inspected and can be filled out by electronic means and then transfer the data to a server immediately upon completion of the inspection.
"Electronic form contractor" means the entity that contracts with the director to implement the electronic form program.
"FMVSS" means Federal Motor Vehicle Safety Standard as prescribed in 49 Code of Federal Regulations Part 571, as it existed on October 1, 2016.
"Moped" shall mean as defined in section 291C-1, HRS.
"Official inspection station" or "inspection station" means a person, partnership, or corporation that is authorized and issued a permit by the county agency to conduct official moped safety inspections.
"Official moped safety inspection" or "inspection" means that safety inspection of moped equipment and components as required by this chapter.
"State" means the State of Hawaii.
"VIN" means the vehicle identification number that is shown on the manufacturer's motor vehicle certification label.
Haw. Code R. § 19-135-3