Cal. Code Regs. tit. 4 § 1330

Current through Register 2024 Notice Reg. No. 44, November 1, 2024

Section 1330 - Physical Requirements of Latex Foam

Any latex foam which does not meet any one of the following minimum physical requirements shall be designated on the law label as "Scrap Latex Foam" or "Scrap Latex Foam Rubber."

(a) Adhesive Bond. The bond shall be stronger than the adjoining foam when separated by hand. The seam shall not be noticeably hard when felt with the palm of the hand.

(b) The latex foam shall be constructed of a single piece or, if used to construct a pillow insert, two molded half sections. Modifications which are designed to enhance a special feature of the product are acceptable when such modifications have been approved by the Bureau.

Cal. Code Regs. Tit. 4, § 1330

1. Amendment filed 5-10-74; effective thirtieth day thereafter (Register 74, No. 19).
2. New NOTE filed 12-10-81 as procedural and organizational; effective upon filing (Register 81, No. 50).
3. Amendment filed 7-24-96; operative 8-23-96 (Register 96, No. 30).

Note: Authority cited: Sections 19034, 19089 and 19150, Business and Professions Code. Reference: Sections 19081, 19085, 19088, 19089 and 19150, Business and Professions Code.