192-00-19 Ark. Code R. § 1
Introduction
The State Land Information Board, now the Arkansas Geographic Information Systems Board, first developed this standard in 2004 order to support the legislative initiatives to establish the Arkansas Spatial Data Infrastructure (ASDI) (A.C.A. § 15-21-504 ). Spatial data layers are often stored digitally and accessed through a relational database management system (RDBMS). Although digital cadastral data is a component of the Arkansas Spatial Data Infrastructure (ASDI), the ways in which users format and maintain it can differ, and they may often disagree on the way a particular spatial data layer structure should be organized. This can pose problems in terms of sharing, locating, and extracting spatial data information. It is intended that geospatial data standards will benefit Geographic Information Systems (GIS) user communities through consistency and efficiency of sharing the data.
Background and Purpose
As articulated in A.C.A. § 15-21-504(f)(1), the Arkansas Geographic Information Systems (GIS) Board, " ...shall define technical specifications and standards to use in the collection, distribution, and reporting of spatial information as required by the State of Arkansas Enterprise Architecture." A.C.A. § 15-21-501 further describes the purpose of the Arkansas GIS board in detail.
The Arkansas Digital Cadastral Mapping Standard is intended to make digital cadastral data more uniform and interoperable. This will facilitate the sharing of a statewide, seamless digital cadastral spatial data layer. Adherence to this standard will enhance the "usability" of the spatial data theme and its attributes by multiple entities, ensure a consistent manner in which the cadastral parcel spatial data and attribute data are collected or stored, and enable the data to be merged seamlessly and become transferable regardless of creator or jurisdictional boundaries. Digital cadastral maps enable the assessor to more efficiently access parcel location and information, reveal geographic relationships that affect property value, and provide a platform for the visualization of data layers and analytical results. (2015. Standard on Digital Cadastral Maps and Parcel Identifiers. IAAO)
Statutory References
Specific portions of Arkansas code pertain directly to and govern certain aspects and uses of digital cadastre. Listed herein are those applicable instances (excerpted).
A.C.A. § 15-21-306. Technical definition of system -- Marking of coordinates on ground.
A.C.A. § 15-21-502. Definitions.
A.C.A. § 15-21-504. Duties, responsibilities, and authority.
Technical Practices
Creating a Cadastral Vector Layer
Procedures
Heads-Up Digitizing:
Parcel boundaries intended to meet the standard may be produced utilizing heads-up digitizing techniques. Within the Cadastral Standard, heads-up digitizing methodologies refers to georeferencing scanned paper maps and tracing the relevant parcel boundaries to create the parcel features. Heads-up digitizing methodologies used may include but are not limited to stream mode and arc/node mode. Heads-up digitizing shall be performed utilizing the following recommendations:
* Capture scale shall not fall outside the range of 1:1200 to 1:3600
* Projection shall be Arkansas State Plane North or Arkansas State Plane South (See Definitions for Projection for each county)
* Datum shall be as specified for the State of Arkansas in A.C.A. § 15-21-306
* Units shall be US Survey Feet
* Source shall be Digital Ortho-imagery not more than five years in age, meeting industry-recognized standards for radiometry, a minimum of 1 foot resolution, and having a minimum positional accuracy plus or minus 3.9 feet. The Arkansas Digital Orthophotography Program (ADOP) imagery is recommended.
* Heads-up digitizing method should only be used where clear visual ground evidence of ownership is present on the Ortho-imagery (i.e., fence line, tree line, grass line, etc.)
Metes and Bounds:
Parcel boundaries may also be produced utilizing metes and bounds techniques. Metes and bounds techniques pertain to the use of coordinate geometry with bearings and distances to accurately map the parcel boundary. Bearing and distance source data used may include but are not limited to legal descriptions, subdivision plats, and plats of survey. Metes and bounds should be used when clear visual ground evidence of ownership is not present. Coordinate geometry (COGO) should be implemented as much as possible to ensure consistency between recorded instruments, other available digital maps, and the base map. Although coordinate geometry is usually regarded as the most accurate method of base map construction, it is sound practice to integrate the COGO work with existing reliable digital sources to ensure accuracy and consistency and minimize the expense and effort of the duplication of existing digital work. When inconsistencies between the property records and other mapping sources (i.e., photo evidence) appear, a thorough investigation should be initiated to discover all the relevant evidence to make the judgment for locating the element on the map accurately. The recorded instrument remains the authoritative record upon which all property valuations must rely. If the record conflicts with the evidence of the map, the recourse for the cadastral mapping specialist is to identify the discrepancy for reconciliation by the proper authorized parties.
The purpose of the cadastral map is to help locate tax parcels, not to identify property boundaries.
Relative Dimension Accuracy:
Relative dimension accuracy refers to the accuracy of the 'digital representation' of the parcel boundary on the Ortho-imagery, in comparison with the legal description from the recorded deed or plat. The relative accuracy is checked by measuring the difference in the calculated acreage versus the acreage recorded from the deed or plat that is stored in the Computer Assisted Mass Appraisal (CAMA) system.
As compared to the parcel acreage recorded in the CAMA system, it is strongly recommended that the calculated acreage for each parcel polygon be within acceptable suggested tolerances as defined in Table 1. However, due to inherent variability in the various types of cadastral records, e.g. CAMA record, deed, plats, etc., strict adherence to these tolerances may not be practical.
Table 1: Acreage tolerances
Acreage Range Value in CAMA | Percentage of Error Allowed in GIS Calculated Acreage |
5.00-8.00 | 15%+/- |
8.01-10.00 | 10%+/- |
10.01-20.00 | 8%+/- |
20.01-30.00 | 6%+/- |
30.01-40.00 | 5%+/- |
40.01 and greater | 4%+/- |
Cadastral Data Characteristics
The following standards apply to the collection and maintenance of the parcel characteristics that are intended to meet the standard. The characteristics for the parcel shall contain but are not limited to the following:
Geometry:
Parcel Outline (Polygon): This is the geographic extent of the parcel, the parcel boundaries forming a closed polygon. The collection of parcel outlines forms the parcel map.
Parcel Centroid (Point): This is a point within the parcel that can be used to attach related information. The parcel centroid is the mathematical center of the parcel polygon generated by GIS Software based on the parcel polygon provided.
Attributes:
Table 2: Cadastral Data Attribute Table
Field Name | Length | Type | Description |
CountyFips | 5 | Text | County FIPS Code, e.g. 05001 |
Countyld | 25 | Text | County Identification Number |
Parcelld | 25 | Text | Parcel Identification Number |
ParcelLgl | 255 | Text | Legal Description |
SourceRef | 50 | Text | Geometry Source Reference |
SourceDate | 10 | Date | Geometry Source Reference Date |
OwnerName | 50 | Text | Owner Name |
AdrNum | 10 | Long integer | Physical Address Number, aka House Number |
PreDir | 2 | Text | Primary Directional Prefix |
PstrNam | 72 | Text | Primary Street Name |
PstrType | 4 | Text | Primary Street Type |
PsufDir | 2 | Text | Primary Directional Suffix |
AdrCity | 50 | Text | Physical City Name |
AdrZip5 | 5 | Long integer | 5-Digit Physical Zip Code |
AdrLabel | 255 | Text | Full Physical Address |
ParcelType | 2 | Text | Property Type Code |
AssessValue | 20 | Double | Assessed Value |
Imp Value | 20 | Double | Improved Value |
LandValue | 20 | Double | Land Value |
TotalValue | 20 | Double | Total Value |
Subdivision | 255 | Text | Subdivision Name |
NBHD | 6 | Text | Neighborhood |
Section | 2 | Integer | Section number, e.g. 1-36 |
Township | 3 | Text | Township, e.g. 5N |
Range | 3 | Text | Range, e.g. 4W |
STR | 20 | Text | Concatenated Section, Township, & Range |
TaxCode | 6 | Text | Tax Code |
TaxArea | 10 | Double | Area Used for Taxation/Assessment Purposes |
CAMAKey | 15 | Double | Unique Key used in CAMA |
CAMAProv | 25 | Text | A County's CAMA System Provider |
County | 25 | Text | Responsible County |
DataProv | 25 | Text | Entity who provided parcel data to the Arkansas GIS Office |
CAMADate | 10 | Date | Date of CAMA database extract |
PubDate | 10 | Date | Date of Publication to the ASDI |
NatCoordSys | 25 | Text | Native Coordinate System |
Definitions
Acreage: Refers to the common square measure of land described in the land tenure system. One acre equals 43,560 square feet.
AdrCity: City associated with the physical address of the property.
AdrLabel: Concatenated physical address of property. This can be composed of variable elements depending on road names. Examples could be: 123 Main St, 211 S Mountain Dr, 2307 Highway 35 S, among others.
AdrNum: Physical address road number of the property as seen in the address point recommendations.
AdrZip5: Physical address Zip Code of property as seen in the address point recommendations.
Assessed Value: This attribute is the monetary amount at which a property is put on the Assessment roll.
Assessment Date: This is the date in which the most recent assessment has been completed.
Attribute(s): Properties and characteristics of spatial data entities.
Cadastral: Showing or recording property boundaries, subdivision lines, buildings, and related details.
Cadastre: An official register of the quantity, value, and ownership of real estate used in apportioning taxes.
CAMA: An acronym meaning "Computer Assisted Mass Appraisal".
CAMADate: The effective date of the CAMA database. Typically, this would be the date the database was extracted from a county's CAMA system.
CAMAKey: Unique key used by the county's Computer Assisted Mass Appraisal Company.
CAMAProv: A county's CAMA system provider. This is the vendor from which a county procures its CAMA system.
County: This attribute contains the name of the county responsible for the parcel polygons.
County FIPS Code: The FIPS county code is a five-digit Federal Information Processing Standard (FIPS) code (FIPS 6-4) which uniquely identifies counties and county equivalents in the United States, certain U.S. possessions, and certain freely associated states.
County Identification Number: A unique identifier for the parcel, using a combination of the County FIPS code and the Parcel Identification Number.
DataProv: This attribute contains the name of the entity who provided parcel data to the Arkansas GIS Office.
Digital Cadastre: The storage and manipulation of computerized representations of parcel map and linked parcel databases (as defined by A.C.A. § 15-21-502(5) ).
Entity: Any object about which an organization chooses to collect data.
Geometry Source Reference: This is a pointer to or an attribute describing the source reference for the parcel. This can be a document number, book/page, or a map of survey. The geometry source reference should describe the source of the parcel geometry, either the centroid or the parcel outline. This should represent the latest and most accurate document available.
Geometry Source Reference Date: The effective date of the Geometry Source Reference. This date is a general indication of the currency of the source. This is the date entered into the CAMA system as the date the deed was filed. It is the date as of which the source documentation was valid.
Georeferencing: Software procedure that consists in positioning, through points with known coordinates (check points), scanned paper images in the respective area of the real territory according to a given reference system.
Improved Value: This attribute is the monetary amount of any improvements that have been made to the land.
Land Value: This attribute is the monetary amount of the land without improvement.
NatCoord: This attribute indicates whether the native coordinate system for the county is Arkansas State Plane North or South.
Neighborhood: This attribute is used to represent geographical or market areas.
Owner Name: Name of the property owner.
Parcel Identification Number: A unique identifier for the parcel as defined by the Computer Aided Mass Appraisal system (CAMA).
Parcel Legal Description: This is the deeded legal boundary for the parcel contained in the CAMA system.
Property Type Code: A code indicating the property's use or classification at the time of reappraisal. Commonly used codes would represent uses such as residential, commercial, or agricultural, among others, and typically indicate the presence of an improvement on the property. A list of approved property type codes is available from the Arkansas Assessment Coordination Department (AACD). Information on codes used by specific counties should be obtained directly from the county assessor's office.
PreDir: Primary Directional Prefix as defined in the State Addressing standard.
PstrNam: Primary Street Name as defined in the State Addressing standard.
PstrType: Primary Street Type as defined in the State Addressing standard.
PsufDir: Primary Directional Suffix as defined in the State Addressing standard.
Projection: State Plane Arkansas North and South Zone
North - Baxter, Benton, Boone, Carroll, Clay, Cleburne, Conway, Craighead, Crawford, Crittenden, Cross, Faulkner, Franklin, Fulton, Greene, Independence, Izard, Jackson, Johnson, Lawrence, Logan, Madison, Marion, Mississippi, Newton, Perry, Poinsett, Pope, Pulaski, Randolph, Scott, Searcy, Sebastian, Sharp, St. Francis, Stone, Van Buren, Washington, White, Woodruff, and Yell.
South - Arkansas, Ashley, Bradley, Calhoun, Chicot, Clark, Cleveland, Columbia, Dallas, Desha, Drew, Garland, Grant, Hempstead, Hot Spring, Howard, Jefferson, Lafayette, Lee, Lincoln, Little River, Lonoke, Miller, Monroe, Montgomery, Nevada, Ouachita, Phillips, Pike, Polk, Prairie, Saline, Sevier, and Union.
Relative Accuracy: A measure of the accuracy of individual features on a map when compared to other features on the same map.
Section, Township, & Range: This attribute indicates the parcel location by Section, Township, and Range. The format for this field should be SXXTXX Direction RXX Direction, Direction for Townships being N or S and Direction for Ranges being E or W.
Subdivision: The name of any subdivision the parcel is located in. Examples are: Jones Addition, Original City of Little Rock, Smith Subdivision Etc.
Tax Area: This is the attribute containing the area being taxed. This is the value that should be used on all cartographic displays of the data.
Tax Code: This attribute represents the tax district.
Topology: Spatial relationships and connectivity among graphic GIS features, such as points, lines, and polygons. These relationships allow display and analysis of "intelligent" data in GIS. Many topological structures incorporate begin and end relationships, direction and right/left identification. Accurate Topology will ensure that there are no gaps or sliver between adjacent parcels, as well as no overlapping parcels.
Total Value: This attribute is the monetary amount of the Improved Value plus the Land Value.
Additional Considerations
Update/Maintenance: The county assessor's office is the responsible entity tasked with creating, maintaining and updating the parcel data.The data shall be maintained in the native coordinate system defined for the county and be delivered to the State in the same coordinate system. Following spatial or attribute updates or modifications performed to the parcel boundary data, it shall be submitted to the entity responsible for performing quality control practices.
Quality Control: Rigorous quality control techniques shall be implemented to ensure the parcel data has acceptable horizontal accuracy and attribute integrity, such as building and maintaining topology, visual and measurement accuracy checks.
Metadata: Cadastral data intended to meet the standard shall have Federal Geographic Data Committee (FGDC) compliant metadata created for each spatial data file. Compliant metadata shall be provided with Digital Cadastre that are created, updated, or distributed by any parties intended to meet the standard. The metadata shall be supplied anytime it is distributed or transferred among participants or other entities responsible for creating, performing quality control, maintaining, updating, and/or distributing the data. The metadata shall be transferred in a FGDC standard format (i.e., -Z39.5, text, HTML file, etc.) and must have successfully passed through a FGDC compliant metadata parser.
Distribution: The 'Digital Cadastre' data shall be distributed digitally via http://gis.arkansas.gov/, Arkansas' Spatial Data Warehouse, at no fee to private or public users.
Revision History
Date | Description of Change |
05/30/2002 | Original standard statement published |
07/02/2004 | Standard became effective |
10/18/2019 | Revision became effective |
Related Resources
National Spatial Data Infrastructure (NSDI) - Cadastral Data Content Standard http://nationalcad.org/CadStandards/CadStand.html
International Association of Assessment Officers (IAAO) - Standard on Digital Cadastral Maps and Parcel Identifiers : https://www.iaao.org
Arkansas Centerline File Standard: http://gis.arkansas.gov/docs/law/20180420ACF Standard Final.pdf
Inquiries
Direct inquiries about this standard to:
Arkansas Geographic Information Systems Office
1 Capitol Mall, Suite 6D
Little Rock, AR 72201
501-682-2767
All inquiries regarding property taxes and associated assessments or approved property type codes within the State of Arkansas should be directed to:
Arkansas Assessment Coordination Department
900 W. Capitol Ave, Suite 320
Little Rock, AR 72201
(501) 324-9240
https://www.arkansasassessment.com/
For inquiries regarding specific properties, please contact the appropriate county assessor.
192.00.19 Ark. Code R. § 001