Ala. Admin. Code r. 480-3-4-.12

Current through Register Vol. 42, No. 10, July 31, 2024

Section 480-3-4-.12 - Guarding Mechanical Equipment

All gears chains, sprockets, friction devices and couplings with protruding bolts or nuts; shaftings and projecting shaft ends that are within seven feet of floor or platform level; belt or rope drives that are within seven feet of floor or platform; circular and band saws and planers shall be adequately guarded.

Author: Department of Industrial Relations

Ala. Admin. Code r. 480-3-4-.12

Prior to October 1, 1982, this regulation was designated as General Rule 12.

Statutory Authority:Code of Ala. 1975, § 25-2-2(3)