Wood Mouldings and Millwork Products From Brazil and China; Scheduling of the Final Phase of Countervailing Duty and Antidumping Duty Investigations

AGENCY:

United States International Trade Commission.

ACTION:

Notice.

SUMMARY:

The Commission hereby gives notice of the scheduling of the final phase of antidumping and countervailing duty investigation Nos. 701-TA-636 and 731-TA-1469-1470 (Final) pursuant to the Tariff Act of 1930 (“the Act”) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of imports of wood mouldings and millwork products from Brazil and China, primarily provided for in subheadings 4409.10.40, 4409.10.45, 4409.10.50, 4409.22.40, 4409.22.50, 4409.29.41, and 4409.29.51 of the Harmonized Tariff Schedule of the United States, preliminarily determined by the Department of Commerce (“Commerce”) to be subsidized and sold at less-than-fair-value.

DATES:

August 12, 2020.

FOR FURTHER INFORMATION CONTACT:

Keysha Martinez (202-205-2136), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on 202-205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202-205-2000. General information concerning the Commission may also be obtained by accessing its internet server ( https://www.usitc.gov ). The public record for these investigations may be viewed on the Commission's electronic docket (EDIS) at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION:

Scope.—For purposes of these investigations, Commerce has defined the subject merchandise as “wood mouldings and millwork products that are made of wood (regardless of wood species), bamboo, laminated veneer lumber (LVL), or of wood and composite materials (where the composite materials make up less than 50 percent of the total merchandise), and which are continuously shaped wood or finger-jointed or edge-glued moulding or millwork blanks (whether or not resawn). The merchandise subject to these investigations can be continuously shaped along any of its edges, ends, or faces.

The percentage of composite materials contained in a wood moulding or millwork product is measured by length, except when the composite material is a coating or cladding. Wood mouldings and millwork products that are coated or clad, even along their entire length, with a composite material, but that are otherwise comprised of wood, LVL, or wood and composite materials (where the non-coating composite materials make up 50 percent or less of the total merchandise) are covered by the scope.

The merchandise subject to these investigations consists of wood, LVL, bamboo, or a combination of wood and composite materials that is continuously shaped throughout its length (with the exception of any endwork/dados), profiled wood having a repetitive design in relief, similar milled wood architectural accessories, such as rosettes and plinth blocks, and fingerjointed or edge-glued moulding or millwork blanks (whether or not resawn). The scope includes continuously shaped wood in the forms of dowels, building components such as interior paneling and jamb parts, and door components such as rails, stiles, interior and exterior door frames or jambs (including split, flat, stop applied, single- or double-rabbeted), frame or jamb kits, and packaged door frame trim or casing sets, whether or not the door components are imported as part of a door kit or set.

The covered products may be solid wood, laminated, finger-jointed, edge-glued, face-glued, or otherwise joined in the production or remanufacturing process and are covered by the scope whether imported raw, coated (e.g., gesso, polymer, or plastic), primed, painted, stained, wrapped (paper or vinyl overlay), any combination of the aforementioned surface coatings, treated, or which incorporate rot-resistant elements (whether wood or composite). The covered products are covered by the scope whether or not any surface coating(s) or covers obscures the grain, textures, or markings of the wood, whether or not they are ready for use or require final machining (e.g., endwork/dado, hinge/strike machining, weatherstrip or application thereof, mitre) or packaging.

All wood mouldings and millwork products are included within the scope even if they are trimmed; cut-to-size; notched; punched; drilled; or have undergone other forms of minor processing.

Subject merchandise also includes wood mouldings and millwork products that have been further processed in a third country, including but not limited to trimming, cutting, notching, punching, drilling, coating, or any other processing that would not otherwise remove the merchandise from the scope of the investigations if performed in the country of manufacture of the in-scope product.

Excluded from the scope of these investigations are countertop/butcherblocks, exterior fencing, exterior decking and exterior siding products (including solid wood siding, non-wood siding (e.g., composite or cement), and shingles) that are not LVL or finger jointed; finished and unfinished doors; flooring; parts of stair steps (including newel posts, balusters, easing, gooseneck, risers, treads, rail fittings and stair stringers); picture frame components three feet and under in individual lengths; and lumber whether solid, finger-jointed, or edge-glued. To be excluded from the scope, finger-jointed or edge-glued lumber must have a nominal thickness greater than 1.5 inches and a certification stamp from an American Lumber Standard Committee-certified grading bureau. The exclusion for lumber whether solid, finger-jointed, or edge-glued does not apply to screen/“surfaced on 4 sides” (S4S) and/or “surface 1 side, 2 edges” (S1S2E) stock (also called boards) that are finger-jointed, edge-glued mouldings, or millwork blanks (whether or not resawn).

Excluded from the scope of these investigations are all products covered by the scope of the antidumping duty order on Hardwood Plywood from the People's Republic of China. See Certain Hardwood Plywood Products from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value, and Antidumping Duty Order, 83 FR 504 (January 4, 2018). Excluded from the scope of these investigations are all products covered by the scope of the antidumping duty order on Multilayered Wood Flooring from the People's Republic of China. See Multilayered Wood Flooring from the People's Republic of China: Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order, 76 FR 76690 (December 8, 2011).

Excluded from the scope of these investigations are all products covered by the scope of the antidumping duty order on Wooden Cabinets and Vanities from the People's Republic of China. See Wooden Cabinets and Vanities and Components Thereof from the People's Republic of China: Antidumping Duty Order, 85 FR 22126 (April 21, 2020).

Excluded from the scope of these investigations are all products covered by the scope of the antidumping duty order on Wooden Bedroom Furniture from the People's Republic of China. See Notice of Amended Final Determination of Sales at Less Than Fair Value and Antidumping Duty Order: Wooden Bedroom Furniture from the People's Republic of China, 70 FR 329 (January 4, 2005).”

Background.—The final phase of these investigations is being scheduled pursuant to sections 705(b) and 731(b) of the Tariff Act of 1930 (19 U.S.C. 1671d(b) and 1673d(b)), as a result of affirmative preliminary determinations by Commerce that certain benefits which constitute subsidies within the meaning of § 703 of the Act (19 U.S.C. 1671b) are being provided to manufacturers, producers, or exporters in China of wood mouldings and millwork products, and that such products are being sold in the United States at less than fair value within the meaning of § 733 of the Act (19 U.S.C. 1673b). The investigations were requested in petitions filed on January 8, 2020, by the Coalition of American Millwork Producers (Bright Wood Corporation, Madras, Oregon; Cascade Wood Products, Inc., White City, Oregon; Endura Products, Inc., Colfax, North Carolina; Sierra Pacific Industries, Red Bluff, California; Sunset Moulding, Live Oak, California; Woodgrain Millwork Inc., Fruitland, Idaho; and Yuba River Moulding, Yuba City, California).

For further information concerning the conduct of this phase of the investigations, hearing procedures, and rules of general application, consult the Commission's Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207).

Although Commerce has preliminarily determined that imports of wood mouldings and millwork products from Brazil are not being and are not likely to be sold in the United States at less than fair value, for purposes of efficiency the Commission hereby waives rule 207.21(b) so that the final phase of the investigations may proceed concurrently in the event that Commerce makes a final affirmative determination with respect to such imports.

Participation in the investigations and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of these investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11 of the Commission's rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigations need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigations.

Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to § 207.7(a) of the Commission's rules, the Secretary will make BPI gathered in the final phase of these investigations available to authorized applicants under the APO issued in the investigations, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigations. A party granted access to BPI in the preliminary phase of the investigations need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO.

Staff report.—The prehearing staff report in the final phase of these investigations will be placed in the nonpublic record on December 8, 2020, and a public version will be issued thereafter, pursuant to § 207.22 of the Commission's rules.

Hearing.—The Commission will hold a hearing in connection with the final phase of these investigations beginning at 9:30 a.m. on Tuesday, December 22, 2020. Information about the place and form of the hearing, including about how to participate in and/or view the hearing, will be posted on the Commission's website at https://www.usitc.gov/calendarpad/calendar.html. Interested parties should check the Commission's website periodically for updates.

Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before December 16, 2020. A nonparty who has testimony that may aid the Commission's deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should participate in a prehearing conference to be held on December 18, 2020, at the U.S. International Trade Commission Building, if deemed necessary. Oral testimony and written materials to be submitted at the public hearing are governed by §§ 201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing.

Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of § 207.23 of the Commission's rules; the deadline for filing is December 15, 2020. Parties may also file written testimony in connection with their presentation at the hearing, as provided in § 207.24 of the Commission's rules, and posthearing briefs, which must conform with the provisions of § 207.25 of the Commission's rules. The deadline for filing posthearing briefs is December 31, 2020. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petition, on or before December 31, 2020. On January 15, 2021, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before January 20, 2021, but such final comments must not contain new factual information and must otherwise comply with § 207.30 of the Commission's rules. All written submissions must conform with the provisions of § 201.8 of the Commission's rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission's rules. The Commission's Handbook on Filing Procedures, available on the Commission's website at https://www.usitc.gov/documents/handbook_on_filing_procedures.pdf,, elaborates upon the Commission's procedures with respect to filings.

Additional written submissions to the Commission, including requests pursuant to § 201.12 of the Commission's rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff.

In accordance with §§ 201.16(c) and 207.3 of the Commission's rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service.

Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.21 of the Commission's rules.