Pursuant to Section 19(b)(1) of the Securities Exchange Act of 1934 (“Act”), and Rule 19b-4 thereunder, notice is hereby given that on July 30, 2020, Financial Industry Regulatory Authority, Inc. (“FINRA”) filed with the Securities and Exchange Commission (“SEC” or “Commission”) the proposed rule change as described in Items I and II below, which Items have been prepared by FINRA. The Commission is publishing this notice to solicit comments on the proposed rule change from interested persons.
17 CFR 240.19b-4.
I. Self-Regulatory Organization's Statement of the Terms of Substance of the Proposed Rule Change
FINRA is proposing to amend the FINRA Rule 6800 Series, FINRA's compliance rule (“Compliance Rule”) regarding the National Market System Plan Governing the Consolidated Audit Trail (the “CAT NMS Plan” or “Plan”) to be consistent with an amendment to the CAT NMS Plan recently approved by the Commission.
Unless otherwise specified, capitalized terms used in this rule filing are defined as set forth in the Compliance Rule.
The text of the proposed rule change is available on FINRA's website at http://www.finra.org,, at the principal office of FINRA and at the Commission's Public Reference Room.
II. Self-Regulatory Organization's Statement of the Purpose of, and Statutory Basis for, the Proposed Rule Change
In its filing with the Commission, FINRA included statements concerning the purpose of and basis for the proposed rule change and discussed any comments it received on the proposed rule change. The text of these statements may be examined at the places specified in Item IV below. FINRA has prepared summaries, set forth in sections A, B, and C below, of the most significant aspects of such statements.
A. Self-Regulatory Organization's Statement of the Purpose of, and Statutory Basis for, the Proposed Rule Change
1. Purpose
The purpose of this proposed rule change is to amend the Rule 6800 Series, the Compliance Rule regarding the CAT NMS Plan, to be consistent with an amendment to the CAT NMS Plan recently approved by the Commission. The Commission approved an amendment to the CAT NMS Plan to amend the requirements for Firm Designated IDs in four ways: (1) To prohibit the use of account numbers as Firm Designated IDs for trading accounts that are not proprietary accounts; (2) to require that the Firm Designated ID for a trading account be persistent over time for each Industry Member so that a single account may be tracked across time within a single Industry Member; (3) to permit the use of relationship identifiers as Firm Designated IDs in certain circumstances; and (4) to permit the use of entity identifiers as Firm Designated IDs in certain circumstances (the “FDID Amendment”). As a result, FINRA proposes to amend the definition of “Firm Designated ID” in Rule 6810 to reflect the changes to the CAT NMS Plan regarding the requirements for Firm Designated IDs.
See Securities Exchange Act Release No. 89397 (July 24, 2020), 85 FR 45941 (July 30, 2020).
Rule 6810(r) defines the term “Firm Designated ID” to mean “a unique identifier for each trading account designated by Industry Members for purposes of providing data to the Central Repository, where each such identifier is unique among all identifiers from any given Industry Member for each business date.”
(1) Prohibit Use of Account Numbers
FINRA proposes to amend the definition of “Firm Designated ID” in Rule 6810(r) to provide that Industry Members may not use account numbers as the Firm Designated ID for trading accounts that are not proprietary accounts. Specifically, FINRA proposes to add the following to the definition of a Firm Designated ID: “provided, however, such identifier may not be the account number for such trading account if the trading account is not a proprietary account.”
(2) Persistent Firm Designated ID
FINRA also proposes to amend the definition of “Firm Designated ID” in Rule 6810(r) to require a Firm Designated ID assigned by an Industry Member to a trading account to be persistent over time, not for each business day. To effect this change, FINRA proposes to amend the definition of “Firm Designated ID” in Rule 6810(r) to add “and persistent” after “unique” and delete “for each business date” so that the definition of “Firm Designated ID” would read, in relevant part, as follows:
If an Industry Member assigns a new account number or entity identifier to a client or customer due to a merger, acquisition or some other corporate action, then the Industry Member should create a new Firm Designated ID to identify the new account identifier/relationship identifier/entity identifier in use at the Industry Member for the entity. In addition, if a previously assigned Firm Designated ID is no longer in use by an Industry Member (e.g., if the trading account associated with the Firm Designated ID has been closed), then an Industry Member may reuse the Firm Designated ID for another trading account. The Plan Processor will maintain a history of the use of each Firm Designated ID, including, for example, the effective dates of the Firm Designated ID with respect to each associated trading account.
A unique and persistent identifier for each trading account designated by Industry Members for purposes of providing data to the Central Repository . . . where each such identifier is unique among all identifiers from any given Industry Member.
(3) Relationship Identifiers
The FDID Amendment also permits an Industry Member to provide a relationship identifier as the Firm Designated ID, rather than an identifier that represents a trading account, in certain scenarios in which an Industry Member does not have an account number available to its order handling and/or execution system at the time of order receipt (e.g., certain institutional accounts, managed accounts, accounts for individuals). In such scenarios, the trading account structure may not be available when a new order is first received from a client and, instead, only an identifier representing the client's trading relationship is available. In these limited instances, the Industry Member may provide an identifier used by the Industry Member to represent the client's trading relationship with the Industry Member instead of an account number.
When a trading relationship is established at a broker-dealer for clients, the broker-dealer typically creates a parent account, under which additional subaccounts are created. However, in some cases, the broker-dealer establishes the parent relationship for a client using a relationship identifier as opposed to an actual parent account. The relationship identifier could be any of a variety of identifiers, such as a short name for a relevant individual or institution. This relationship identifier is established prior to any trading for the client. If a relationship identifier has been established rather than a parent account, and an order is placed on behalf of the client, any executed trades will be kept in a firm account (e.g., a facilitation or average price account) until they are allocated to the proper subaccount(s), i.e., the accounts associated with the parent relationship identifier connecting them to the client.
Relationship identifiers are used in circumstances in which the account structure is not available to the trading system at the time of order placement. The clients have established accounts prior to the trade that satisfy relevant regulatory obligations for opening accounts, such as Know Your Customer and other customer obligations. However, the order receipt workflows operate using relationship identifiers, not accounts.
For Firm Designated ID purposes, as with an identifier for a trading account, the relationship identifier must be persistent over time. The relationship identifier also must be unique among all identifiers from any given Industry Member. With these requirements, a single relationship could be tracked across time within a single Industry Member using the Firm Designated ID. In addition, the relationship identifier must be masked as the relationship identifier could be a name or otherwise provide an indication as to the identity of the relationship. The masking requirement would avoid potentially revealing the identity of the relationship.
An example of the use of a relationship identifier as a Firm Designated ID would be as follows: Suppose that Big Fund Manager is known in Industry Member A's systems as “BFM1.” When an order is placed by Big Fund Manager, the order is tagged to BFM1. Industry Member A could use a masked version of BFM1 in place of the Firm Designated ID representing a trading account when reporting a new order from Big Fund Manager instead of the account numbers to which executed shares/contracts will be allocated at a later time via a booking or other system. Similarly, another example of the use of a relationship identifier as a Firm Designated ID would involve an individual in place of the Big Fund Manager in the above example.
In accordance with the FDID Amendment, FINRA proposes to amend the definition of a “Firm Designated ID” in Rule 6810(r) to permit Industry Members to provide a relationship identifier as the Firm Designated ID as described above. Specifically, FINRA proposes to amend the definition of “Firm Designated ID” in Rule 6810(r) to state that a Firm Designated ID means, in relevant part, “a unique and persistent relationship identifier when an Industry Member does not have an account number available to its order handling and/or execution system at the time of order receipt, provided, however, such identifier must be masked.”
(4) Entity Identifiers
The FDID Amendment also permits Industry Members to provide an entity identifier, rather than an identifier that represents a trading account, when an employee of the Industry Member is exercising discretion over multiple client accounts and creates an aggregated order for which a trading account number of the Industry Member is not available at the time of order origination. An entity identifier is an identifier of the Industry Member that represents the firm discretionary relationship with the client rather than a firm trading account.
The scenarios in which a firm uses an entity identifier are comparable to when a firm uses a relationship identifier (as described above) except the entity identifier represents the Industry Member rather than a client. As with relationship identifiers, entity identifiers are used in circumstances in which the account structure is not available to the trading system at the time of order placement. In this workflow, the Industry Member's order handling and/or execution system does not have an account number at the time of order origination. The relevant clients that will receive an allocation of the execution have established accounts prior to the trade that satisfy relevant regulatory obligations for opening accounts, such as Know Your Customer and other customer obligations. However, the order origination workflows operate using entity identifiers, not accounts.
For Firm Designated ID purposes, as with the identifier for a trading account or a relationship, the entity identifier must be persistent over time. The entity identifier also must be unique among all identifiers from any given Industry Member. Each Industry Member must make its own risk determination as to whether it believes it is necessary to mask the entity identifier when using an entity identifier to report the Firm Designated ID to CAT.
An example of the use of an entity identifier as a Firm Designated ID would be when Industry Member 1 has an employee that is a registered representative that has discretion over several client accounts held at Industry Member 1. The registered representative places an order that he will later allocate to individual client accounts. At the time the order is placed, the trading system only knows it involves a representative of Industry Member 1 and it does not have a specific trading account that could be used for Firm Designated ID reporting. Therefore, Industry Member 1 could report IM1, its entity identifier, as the FDID with the new order.
In accordance with the FDID Amendment, FINRA proposes to amend the definition of “Firm Designated ID” in Rule 6810(r) to permit the use of an entity identifier as a Firm Designated ID as described above. Specifically, FINRA proposes to amend the definition of “Firm Designated ID” in Rule 6810(r) to state that a Firm Designated ID means, in relevant part, “a unique and persistent entity identifier when an employee of an Industry Member is exercising discretion over multiple client accounts and creates an aggregated order for which a trading account number of the Industry Member is not available at the time of order origination.”
FINRA has filed the proposed rule change for immediate effectiveness and has requested that the Commission waive the requirement that the proposed rule change not become operative for 30 days after the date of the filing, so the proposed rule change can become operative on the date of filing.
2. Statutory Basis
FINRA believes that the proposed rule change is consistent with the provisions of Section 15A(b)(6) of the Act, which requires, among other things, that FINRA rules must be designed to prevent fraudulent and manipulative acts and practices, to promote just and equitable principles of trade, and, in general, to protect investors and the public interest, and Section 15A(b)(9) of the Act, which requires that FINRA rules not impose any burden on competition that is not necessary or appropriate.
15 U.S.C. 78 o-3(b)(6).
15 U.S.C. 78 o-3(b)(9).
FINRA believes that the proposed rule change is consistent with the Act because it is consistent with and implements a recent amendment to the CAT NMS Plan and is designed to assist FINRA and its Industry Members in meeting regulatory obligations pursuant to the Plan. In approving the Plan, the SEC noted that the Plan “is necessary and appropriate in the public interest, for the protection of investors and the maintenance of fair and orderly markets, to remove impediments to, and perfect the mechanism of a national market system, or is otherwise in furtherance of the purposes of the Act.” To the extent that this proposed rule change implements the Plan and applies specific requirements to Industry Members, FINRA believes that the proposed rule change furthers the objectives of the Plan, as identified by the SEC, and is therefore consistent with the Act.
See Securities Exchange Act Release No. 79318 (November 15, 2016), 81 FR 84696, 84697 (November 23, 2016).
B. Self-Regulatory Organization's Statement on Burden on Competition
FINRA does not believe that the proposed rule change will result in any burden on competition that is not necessary or appropriate in furtherance of the purposes of the Act. FINRA notes that the proposed rule change is consistent with a recent amendment to the CAT NMS Plan and is designed to assist FINRA in meeting its regulatory obligations pursuant to the Plan. FINRA also notes that the FDID Amendment will apply equally to all Industry Members that trade NMS Securities and OTC Equity Securities. FINRA anticipates no new costs to member firms reporting to the CAT as a result of this proposal, because any related costs have already been built in the technical specifications previously determined and shared broadly in conformance with the CAT NMS Plan, as amended. In addition, FINRA and all national securities exchanges are proposing this amendment to their Compliance Rules. Therefore, this is not a competitive rule filing and does not impose a burden on competition.
C. Self-Regulatory Organization's Statement on Comments on the Proposed Rule Change Received From Members, Participants, or Others
Written comments were neither solicited nor received.
III. Date of Effectiveness of the Proposed Rule Change and Timing for Commission Action
FINRA has filed the proposed rule change pursuant to Section 19(b)(3)(A)(iii) of the Act and Rule 19b-4(f)(6) thereunder. Because the proposed rule change does not: (i) Significantly affect the protection of investors or the public interest; (ii) impose any significant burden on competition; and (iii) become operative prior to 30 days from the date on which it was filed, or such shorter time as the Commission may designate, if consistent with the protection of investors and the public interest, the proposed rule change has become effective pursuant to Section 19(b)(3)(A) of the Act and Rule 19b-4(f)(6)(iii) thereunder.
17 CFR 240.19b-4(f)(6).
17 CFR 240.19b-4(f)(6). In addition, Rule 19b-4(f)(6)(iii) requires FINRA to give the Commission written notice of FINRA's intent to file the proposed rule change, along with a brief description and text of the proposed rule change, at least five business days prior to the date of filing of the proposed rule change, or such shorter time as designated by the Commission. FINRA has satisfied this requirement.
A proposed rule change filed under Rule 19b-4(f)(6) normally does not become operative prior to 30 days after the date of the filing. However, pursuant to Rule 19b-4(f)(6)(iii), the Commission may designate a shorter time if such action is consistent with the protection of investors and the public interest. FINRA has asked the Commission to waive the 30-day operative delay so that the proposal may become operative by July 31, 2020. The Commission believes that waiver of the 30-day operative delay is consistent with the protection of investors and the public interest because it implements an amendment to the CAT NMS Plan approved by the Commission. Accordingly, the Commission hereby waives the 30-day operative delay and designates the proposal operative as of July 31, 2020.
17 CFR 240.19b-4(f)(6)(iii).
See Securities Exchange Act Release No. 89397 (July 24, 2020) (Federal Register publication pending).
For purposes only of waiving the 30-day operative delay, the Commission has considered the proposed rule's impact on efficiency, competition, and capital formation. See 15 U.S.C. 78c(f).
At any time within 60 days of the filing of this proposed rule change, the Commission summarily may temporarily suspend such rule change if it appears to the Commission that such action is necessary or appropriate in the public interest, for the protection of investors, or otherwise in furtherance of the purposes of the Act. If the Commission takes such action, the Commission will institute proceedings to determine whether the proposed rule change should be approved or disapproved.
IV. Solicitation of Comments
Interested persons are invited to submit written data, views, and arguments concerning the foregoing, including whether the proposed rule change is consistent with the Act. Comments may be submitted by any of the following methods:
Electronic Comments
- Use the Commission's internet comment form ( http://www.sec.gov/rules/sro.shtml ); or
- Send an email to rule-comments@sec.gov. Please include File Number SR-FINRA-2020-023 on the subject line.
Paper Comments
- Send paper comments in triplicate to Secretary, Securities and Exchange Commission, 100 F Street NE, Washington, DC 20549-1090.
All submissions should refer to File Number SR-FINRA-2020-023. This file number should be included on the subject line if email is used. To help the Commission process and review your comments more efficiently, please use only one method. The Commission will post all comments on the Commission's internet website ( http://www.sec.gov/rules/sro.shtml ). Copies of the submission, all subsequent amendments, all written statements with respect to the proposed rule change that are filed with the Commission, and all written communications relating to the proposed rule change between the Commission and any person, other than those that may be withheld from the public in accordance with the provisions of 5 U.S.C. 552, will be available for website viewing and printing in the Commission's Public Reference Room, 100 F Street NE, Washington, DC 20549, on official business days between the hours of 10:00 a.m. and 3:00 p.m. Copies of the filing also will be available for inspection and copying at the principal office of FINRA. All comments received will be posted without change. Persons submitting comments are cautioned that we do not redact or edit personal identifying information from comment submissions. You should submit only information that you wish to make available publicly. All submissions should refer to File Number SR-FINRA-2020-023, and should be submitted on or before August 27, 2020.
For the Commission, by the Division of Trading and Markets, pursuant to delegated authority.
J. Matthew DeLesDernier,
Assistant Secretary.
[FR Doc. 2020-17134 Filed 8-5-20; 8:45 am]
BILLING CODE 8011-01-P