AGENCY:
Enforcement and Compliance, Formerly Import Administration, International Trade Administration, Department of Commerce.
SUMMARY:
As a result of the determinations by the Department of Commerce (the “Department”) and the International Trade Commission (the “ITC”) that revocation of the antidumping duty order on non-malleable cast iron pipe fittings from the People's Republic of China (“PRC”) would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, the Department is publishing a notice of continuation of this antidumping duty order.
DATES:
Effective Date: February 12, 2014.
FOR FURTHER INFORMATION:
Jamie Blair-Walker, AD/CVD Operations, Office IV, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: 202-482-2615.
SUPPLEMENTARY INFORMATION:
Background
On July 1, 2013, the Department published the notice of initiation of the second sunset review of the antidumping duty order on non-malleable cast iron pipe fittings from the PRC, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the “Act”). As a result of its review, the Department determined that revocation of the antidumping duty order on non-malleable cast iron pipe fittings from the PRC would likely lead to continuation or recurrence of dumping and notified the ITC of the magnitude of the margins likely to prevail should the order be revoked. On February 5, 2014, the ITC published its determination, pursuant to section 751(c) of the Act, that revocation of the antidumping duty order on non-malleable cast iron pipe fittings from the PRC would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.
See Initiation of Five-Year (“Sunset”) Review, 78 FR 39256 (July 1, 2013).
See Non-Malleable Cast Iron Pipe Fittings From the People's Republic of China: Final Results of the Expedited Second Sunset Review of the Antidumping Duty Order, 78 FR 72639 (December 3, 2013).
See Non-Malleable Cast Iron Pipe Fittings From China, 79 FR 6923 (February 5, 2014).
Scope of the Order
The products covered by the order are finished and unfinished non-malleable cast iron pipe fittings with an inside diameter ranging from 1/4 inch to 6 inches, whether threaded or unthreaded, regardless of industry or proprietary specifications. The subject fittings include elbows, ells, tees, crosses, and reducers as well as flanged fittings. These pipe fittings are also known as “cast iron pipe fittings” or “gray iron pipe fittings.” These cast iron pipe fittings are normally produced to ASTM A-126 and ASME B.16.4 specifications and are threaded to ASME B1.20.1 specifications. Most building codes require that these products are Underwriters Laboratories (UL) certified. The scope does not include cast iron soil pipe fittings or grooved fittings or grooved couplings.
Fittings that are made out of ductile iron that have the same physical characteristics as the gray or cast iron fittings subject to the scope above or which have the same physical characteristics and are produced to ASME B.16.3, ASME B.16.4, or ASTM A-395 specifications, threaded to ASME B1.20.1 specifications and UL certified, regardless of metallurgical differences between gray and ductile iron, are also included in the scope of the order. These ductile fittings do not include grooved fittings or grooved couplings. Ductile cast iron fittings with mechanical joint ends (MJ), or push on ends (PO), or flanged ends and produced to the American Water Works Association (“AWWA”) specifications AWWA C110 or AWWA C153 are not included. Additionally, certain brake fluid tube connectors are excluded from the scope of this order.
To be excluded, the connector must meet the following description: The connector is a “joint block” for brake fluid tubes and is made of non-malleable cast iron to Society of Automotive Engineers (SAE) automotive standard J431. The tubes have an inside diameter of 3.44 millimeters (0.1355 inches) and the inside diameters of the fluid flow channels of the connector are 3.2 millimeters (0.1260 inches) and 3.8 millimeters (0.1496 inches). The end of the tube is forced by pressure over the end of a flared opening in the connector also known as “flared joint.” The flared joint, once made fast, permits brake fluid to flow through channels that never exceed 3.8 millimeters (0.1496 inches) in diameter.
Imports of subject merchandise are currently classifiable in the Harmonized Tariff Schedule of the United States (“HTSUS”) under item numbers 7307.11.00.30, 7307.11.00.60, 7307.19.30.60, 7307.19.30.85, 7326.90.8588. HTSUS subheadings are provided for convenience and customs purposes. The written description of the scope of the order is dispositive.
On April 21, 2009, in consultation with U.S. Customs and Border Protection, the Department added the following HTSUS classification to the anti-dumping duty module for non-malleable cast iron pipe fittings: 7326.90.8588. See Memorandum from Abdelali Elouaradia, Office Director, Import Administration, Office 4 to Stephen Claeys, Deputy Assistant Secretary, Import Administration regarding the Final Scope Ruling on Black Cast Iron Cast, Green Ductile Flange and Twin Tee, antidumping duty order on non-malleable iron cast pipe fittings from China, dated September 19, 2008. See also Memorandum to the file from Karine Gziryan, Financial Analyst, Office 4, regarding Module Update adding Harmonized Tariff Schedule Number for twin tin fitting included in the scope of antidumping order on non-malleable iron cast pipe fittings from China, dated April 22, 2009.
Continuation of the Order
As a result of the determinations by the Department and the ITC that revocation of the antidumping duty order would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of the Act, the Department hereby orders the continuation of the antidumping order on non-malleable cast iron pipe fittings from the PRC. U.S. Customs and Border Protection will continue to collect antidumping duty cash deposits at the rates in effect at the time of entry for all imports of subject merchandise. The effective date of the continuation of the order will be the date of publication in the Federal Register of this notice of continuation. Pursuant to section 751(c)(2) of the Act, the Department intends to initiate the next five-year review of the order not later than 30 days prior to the fifth anniversary of the effective date of continuation.
This five-year sunset review and this notice are in accordance with section 751(c) of the Act and published pursuant to section 777(i)(1) of the Act and 19 CFR 351.218(f)(4).
Dated: February 6, 2014.
Paul Piquado,
Assistant Secretary for Enforcement and Compliance.
[FR Doc. 2014-03071 Filed 2-11-14; 8:45 am]
BILLING CODE 3510-DS-P