National Emission Standards for Hazardous Air Pollutants: Plywood and Composite Wood Products; Extension of Comment Period

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Proposed rule; extension of public comment period.

SUMMARY:

On May 18, 2023, the U.S. Environmental Protection Agency (EPA) proposed a rule titled “National Emission Standards for Hazardous Air Pollutants: Plywood and Composite Wood Products.” The EPA is extending the comment period on this proposed rule that currently closes on July 3, 2023, by 15 days. The comment period will now remain open until July 18, 2023, to allow additional time for stakeholders to review and comment on the proposal.

DATES:

The public comment period for the proposed rule published in the Federal Register (FR) on May 18, 2023 (88 FR 31856), originally ending July 3, 2023, is being extended by 15 days. Written comments must be received on or before July 18, 2023.

ADDRESSES:

Submit comments, identified by Docket ID No. EPA–HQ–OAR–2016–0243, by any of the following methods:

• Federal eRulemaking Portal: https://www.regulations.gov/ (our preferred method). Follow the online instructions for submitting comments.

• Email: a-and-r-docket@epa.gov. Include Docket ID No. EPA–HQ–OAR–2016–0243 in the subject line of the message.

• Fax: (202) 566–9744. Attention Docket ID No. EPA–HQ–OAR–2016–0243.

• Mail: U.S. Environmental Protection Agency, EPA Docket Center, Docket ID No. EPA–HQ–OAR–2016–0243, Mail Code 28221T, 1200 Pennsylvania Avenue NW, Washington, DC 20460.

• Hand Delivery or Courier (by scheduled appointment only): EPA Docket Center, WJC West Building, Room 3334, 1301 Constitution Avenue NW, Washington, DC 20004. The Docket Center's hours of operation are 8:30 a.m.–4:30 p.m., Monday–Friday (except Federal holidays).

Instructions. All submissions received must include the Docket ID No. for this rulemaking. Comments received may be posted without change to https://www.regulations.gov, including any personal information provided. For detailed instructions on sending comments and additional information on the rulemaking process, see the SUPPLEMENTARY INFORMATION section of this document.

FOR FURTHER INFORMATION CONTACT:

For questions about this action, contact Ms. Katie Hanks, Sector Policies and Programs Division (E143–03), Environmental Protection Agency, Research Triangle Park, North Carolina 27711; telephone number: (919) 541–2159; and email address: hanks.katie@epa.gov.

SUPPLEMENTARY INFORMATION:

Rationale. On May 18, 2023, the U.S. Environmental Protection Agency (EPA) proposed a rule titled “National Emission Standards for Hazardous Air Pollutants: Plywood and Composite Wood Products.” 88 FR 31856. The comment period on this proposed rule currently closes on July 3, 2023. The EPA has received numerous requests for additional time to review and comment on this proposed rule. The EPA has decided to extend the period by 15 days. The public comment period will now end on July 18, 2023.

Docket. The EPA has established a docket for this rulemaking under Docket ID No. EPA–HQ–OAR–2016–0243. All documents in the docket are listed in https://www.regulations.gov. Although listed, some information is not publicly available, e.g., Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the internet and will be publicly available only in hard copy. With the exception of such material, publicly available docket materials are available electronically in Regulations.gov.

Instructions. Direct your comments to Docket ID No. EPA–HQ–OAR–2016–0243. The EPA's policy is that all comments received will be included in the public docket without change and may be made available online at https://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be CBI or other information whose disclosure is restricted by statute. Do not submit electronically to https://www.regulations.gov any information that you consider to be CBI or other information whose disclosure is restricted by statute. This type of information should be submitted as discussed below.

The EPA may publish any comment received to its public docket. Multimedia submissions (audio, video, etc.) must be accompanied by a written comment. The written comment is considered the official comment and should include discussion of all points you wish to make. The EPA will generally not consider comments or comment contents located outside of the primary submission ( i.e., on the Web, cloud, or other file sharing system). For additional submission methods, the full EPA public comment policy, information about CBI or multimedia submissions, and general guidance on making effective comments, please visit https://www.epa.gov/dockets/commenting-epa-dockets.

The https://www.regulations.gov website allows you to submit your comment anonymously, which means the EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an email comment directly to the EPA without going through https://www.regulations.gov, your email address will be automatically captured and included as part of the comment that is placed in the public docket and made available on the internet. If you submit an electronic comment, the EPA recommends that you include your name and other contact information in the body of your comment and with any digital storage media you submit. If the EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, the EPA may not be able to consider your comment. Electronic files should not include special characters or any form of encryption and be free of any defects or viruses. For additional information about the EPA's public docket, visit the EPA Docket Center homepage at https://www.epa.gov/dockets.

Submitting CBI. Do not submit information containing CBI to the EPA through https://www.regulations.gov. Clearly mark the part or all of the information that you claim to be CBI. For CBI information on any digital storage media that you mail to the EPA, note the docket ID, mark the outside of the digital storage media as CBI, and identify electronically within the digital storage media the specific information that is claimed as CBI. In addition to one complete version of the comments that includes information claimed as CBI, you must submit a copy of the comments that does not contain the information claimed as CBI directly to the public docket through the procedures outlined in instructions above. If you submit any digital storage media that does not contain CBI, mark the outside of the digital storage media clearly that it does not contain CBI and note the docket ID. Information not marked as CBI will be included in the public docket and the EPA's electronic public docket without prior notice. Information marked as CBI will not be disclosed except in accordance with procedures set forth in 40 Code of Federal Regulations (CFR) part 2.

Our preferred method to receive CBI is for it to be transmitted electronically using email attachments, File Transfer Protocol (FTP), or other online file sharing services ( e.g., Dropbox, OneDrive, Google Drive). Electronic submissions must be transmitted directly to the OAQPS CBI Office at the email address oaqpscbi@epa.gov, and as described above, should include clear CBI markings and note the docket ID. If assistance is needed with submitting large electronic files that exceed the file size limit for email attachments, and if you do not have your own file sharing service, please email oaqpscbi@epa.gov to request a file transfer link. If sending CBI information through the postal service, please send it to the following address: OAQPS Document Control Officer (C404–02), OAQPS, U.S. Environmental Protection Agency, Research Triangle Park, North Carolina 27711, Attention Docket ID No. EPA–HQ–OAR–2016–0243. The mailed CBI material should be double wrapped and clearly marked. Any CBI markings should not show through the outer envelope.