AGENCY:
Import Administration, International Trade Administration, Department of Commerce.
SUMMARY:
On July 11, 2007, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping order on certain small diameter seamless carbon and alloy steel standard, line and pressure pipe (seamless pipe) from Brazil. See Certain Small Diameter Seamless Carbon and Alloy Steel Standard, Line and Pressure Pipe from Brazil; Preliminary Results of Antidumping Duty Administrative Review, 72 FR 37723 (July 11, 2007) (Preliminary Results). The review covers one producer/exporter, V&M do Brasil, S.A. (VMB). The period of review (POR) is August 1, 2005, through July 15, 2006.1 We invited interested parties to comment on our Preliminary Results. The Department received no comments concerning our preliminary results; therefore, our final results remain unchanged from our preliminary results. The final results are listed in the section “Final Results of Review” below.
EFFECTIVE DATE:
October 23, 2007.
FOR FURTHER INFORMATION CONTACT:
Dena Crossland or Stephen Bailey, AD/CVD Operations, Office 7, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-3362 or (202) 482-0193, respectively.
SUPPLEMENTARY INFORMATION:
Background
On May 2, 2007, the International Trade Commission determined revocation of the antidumping duty orders on seamless pipe from Argentina and Brazil would not likely lead to continuation or recurrence of material injury to an industry in the United States. See Certain Seamless Carbon and Alloy Steel Standard, Line, and Pressure Pipe from Argentina, Brazil, and Germany, 72 FR 26153 (May 8, 2007), and ITC Publication 3918 (May 2007), Investigation No. 731-TA-707-709 (Second Review). Thus, the Department revoked the antidumping duty orders on seamless line pipe from Argentina and Brazil, pursuant to sections 751(c) and 751(d) of the Act. See Revocation Pursuant to Second Five-year (“Sunset”) Reviews of Antidumping Duty Orders: Certain Small Diameter Carbon and Alloy Seamless Standard, Line and Pressure Pipe from Argentina and Brazil, 72 FR 28027 (May 18, 2007) (Revocation of Seamless Pipe from Argentina and Brazil). The Department stated in the Revocation of Seamless Pipe from Argentina and Brazil that it will complete any pending administrative reviews of these orders and will conduct administrative reviews of subject merchandise entered prior to the effective date of revocation in response to appropriately filed requests for review. Pursuant to section 751(d)(2) of the Act and 19 CFR 351.222(i)(2)(i), the effective date of revocation is July 16, 2006. As a result, the Department is completing the instant review of seamless pipe from Brazil. Accordingly, the period of review for this proceeding is from August 1, 2005, to July 15, 2006.
On July 11, 2007, the Department published the preliminary results of this review in the Federal Register. See Preliminary Results. We invited parties to comment on the Preliminary Results. We received no comments or a request for a hearing.
Scope of the Antidumping Duty Review
The products covered by this antidumping duty review are seamless pipes produced to the ASTM A-335, ASTM A-106, ASTM A-53 and API 5L specifications and meeting the physical parameters described below, regardless of application. The scope of this review also includes all products used in standard, line, or pressure pipe applications and meeting the physical parameters below, regardless of specification.
For purposes of this review, seamless pipes are seamless carbon and alloy (other than stainless) steel pipes, of circular cross-section, not more than 114.3 mm (4.5 inches) in outside diameter, regardless of wall thickness, manufacturing process (hot-finished or cold-drawn), end finish (plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish. These pipes are commonly known as standard pipe, line pipe or pressure pipe, depending upon the application. They may also be used in structural applications. Pipes produced in non-standard wall thickness are commonly referred to as tubes.
The seamless pipes subject to this antidumping duty review are currently classifiable under subheadings 7304.19.10.20, 7304.19.50.20, 7304.31.60.50, 7304.39.00.16, 7304.39.00.20, 7304.39.00.24, 7304.39.00.28, 7304.39.00.32, 7304.51.50.05, 7304.51.50.60, 7304.59.60.00, 7304.59.80.10, 7304.59.80.15, 7304.59.80.20, and 7304.59.80.25 of the Harmonized Tariff Schedule of the United States (HTSUS). The following information further defines the scope of this order, which covers pipes meeting the physical parameters described above:
Specifications, Characteristics and Uses: Seamless pressure pipes are intended for the conveyance of water, steam, petrochemicals, chemicals, oil products, natural gas, and other liquids and gasses in industrial piping systems. They may carry these substances at elevated pressures and temperatures and may be subject to the application of external heat. Seamless carbon steel pressure pipe meeting the ASTM standard A-106 may be used in temperatures of up to 1000 degrees Fahrenheit, at various American Society of Mechanical Engineers (“ASME”) code stress levels. Alloy pipes made to ASTM standard A-335 must be used if temperatures and stress levels exceed those allowed for A-106 and the ASME codes. Seamless pressure pipes sold in the United States are commonly produced to the ASTM A-106 standard.
Seamless standard pipes are most commonly produced to the ASTM A-53 specification and generally are not intended for high temperature service. They are intended for the low temperature and pressure conveyance of water, steam, natural gas, air and other liquids and gasses in plumbing and heating systems, air conditioning units, automatic sprinkler systems, and other related uses. Standard pipes (depending on type and code) may carry liquids at elevated temperatures but must not exceed relevant ASME code requirements.
Seamless line pipes are intended for the conveyance of oil and natural gas or other fluids in pipelines. Seamless line pipes are produced to the API 5L specification.
Seamless pipes are commonly produced and certified to meet ASTM A-106, ASTM A-53 and API 5L specifications. Such triple certification of pipes is common because all pipes meeting the stringent ASTM A-106 specification necessarily meet the API 5L and ASTM A-53 specifications. Pipes meeting the API 5L specification necessarily meet the ASTM A-53 specification. However, pipes meeting the A-53 or API 5L specifications do not necessarily meet the A-106 specification. To avoid maintaining separate production runs and separate inventories, manufacturers triple-certify the pipes. Since distributors sell the vast majority of this product, they can thereby maintain a single inventory to service all customers.
The primary application of ASTM A-106 pressure pipes and triple-certified pipes is in pressure piping systems by refineries, petrochemical plants and chemical plants. Other applications are in power generation plants (electrical-fossil fuel or nuclear), and in some oil field uses (on shore and off shore) such as for separator lines, gathering lines and metering runs. A minor application of this product is for use as oil and gas distribution lines for commercial applications. These applications constitute the majority of the market for the subject seamless pipes. However, A-106 pipes may be used in some boiler applications.
The scope of this order includes all seamless pipe meeting the physical parameters described above and produced to one of the specifications listed above, regardless of application, and whether or not also certified to a non-covered specification. Standard, line and pressure applications and the above-listed specifications are defining characteristics of the scope of this order. Therefore, seamless pipes meeting the physical description above, but not produced to the ASTM A-335, ASTM A-106, ASTM A-53, or API 5L standards shall be covered if used in a standard, line or pressure application.
For example, there are certain other ASTM specifications of pipe which, because of overlapping characteristics, could potentially be used in A-106 applications. These specifications generally include A-162, A-192, A-210, A-333, and A-524. When such pipes are used in a standard, line or pressure pipe application, such products are covered by the scope of this order.
Specifically excluded from this review are boiler tubing and mechanical tubing, if such products are not produced to ASTM A-335, ASTM A-106, ASTM A-53 or API 5L specifications and are not used in standard, line or pressure applications. In addition, finished and unfinished oil country tubular goods (OCTG) are excluded from the scope of this review, if covered by the scope of another antidumping duty order from the same country. If not covered by such an OCTG order, finished and unfinished OCTG are included in this scope when used in standard, line or pressure applications. Finally, also excluded from this review are redraw hollows for cold-drawing when used in the production of cold-drawn pipe or tube.
Excluded from this order are shipments of seamless carbon and alloy (other than stainless) steel pipes, of circular cross-section, not more than 114.3 mm (4.5 inches) in outside diameter, regardless of wall thickness or manufacturing process (hot-finished or cold-drawn) that 1) has been cut into lengths of six to 120 inches, 2) has had the inside bore ground to a smooth surface, 3) has had multiple layers of specially formulated corrosion resistant glass permanently baked on at temperatures of 1,440 to 1,700 degrees Fahrenheit in thicknesses from 0.032 to 0.085 inch (40 to 80 mils), and 4) has flanges or other forged stub ends welded on both ends of the pipe. The special corrosion resistant glass referred to in this definition may be glass containing by weight 1) 70 to 80 percent of an oxide of silicone, zirconium, titanium or cerium (Oxide Group RO2), 2) 10 to 15 percent of an oxide of sodium, potassium, or lithium (Oxide Group RO), 3) from a trace amount to five percent of an oxide of either aluminum, cobalt, iron, vanadium, or boron (Oxide Group R2O3), or 4) from a trace amount to five percent of a fluorine compound in which fluorine replaces the oxygen in any one of the previously listed oxide groups. These glass-lined pressure pipes are commonly manufactured for use in glass-lined equipment systems for processing corrosive or reactive chemicals, including acrylates, alkanolamines, herbicides, pesticides, pharmaceuticals and solvents. The glass-lined pressure pipes excluded from this antidumping duty review are currently classifiable under subheadings 7304.39.0020, 7304.39.0024 and 7304.39.0028 of the HTSUS.
Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the scope of this order is dispositive.
Final Results of Review
As noted above, the Department received no comments concerning the Preliminary Results. As there have been no changes from or comments on the Preliminary Results, we are not attaching a Decision Memorandum to this Federal Register notice. For further details of the issues addressed in this proceeding, see the Preliminary Results. The final weighted-average dumping margin for the period August 1, 2005, through July 15, 2006, is as follows:
Manufacturer / Exporter | Margin (percent) |
---|---|
V&M do Brasil, S.A. | 0.00 |
Assessment Rates
The Department will determine and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries, in accordance with 19 CFR 351.212(b). Since the importer-specific assessment rate calculated in the final results of this review is 0 percent, we will instruct CBP to liquidate without regard to antidumping duties for these entries. See 19 CFR 351.106(c)(1).
The Department clarified its “automatic assessment” regulation on May 6, 2003. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003) (Assessment Policy Notice). This clarification will apply to entries of subject merchandise during the POR produced by companies included in these final results of review for which the reviewed companies did not know that the merchandise they sold to the intermediary (e.g., a reseller, trading company, or exporter) was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the “All Others” rate if there is no rate for the intermediary involved in the transaction. See Assessment Policy Notice for a full discussion of this clarification.
Cash Deposit Requirements
The Department notified CBP to discontinue suspension of liquidation and collection of cash deposits on entries of the subject merchandise entered or withdrawn from warehouse on or after July 16, 2006, the effective date of revocation of the antidumping duty order.
Notification to Importers
This notice also serves as a preliminary reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.
Administrative Protective Order
This notice also serves as a reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely written notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation that is subject to sanction.
This administrative review and notice are issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act.
Dated: October 16, 2007.
David M. Spooner,
Assistant Secretary for Import Administration.
[FR Doc. E7-20844 Filed 10-22-07; 8:45 am]
BILLING CODE 3510-DS-S