AGENCY:
Federal Aviation Administration (FAA), Department of Transportation (DOT).
ACTION:
Final rule.
SUMMARY:
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD was prompted by a report that the equipment racks were not designed to support the actual weight of all the equipment and the secondary direct current power centers under all loading conditions. This AD requires modifying the equipment racks. We are issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective July 20, 2017.
The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of July 20, 2017.
ADDRESSES:
For service information identified in this final rule, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone: 514-855-5000; fax: 514-855-7401; email: thd.crj@aero.bombardier.com; Internet http://www.bombardier.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221. It is also available on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-9387.
Examining the AD Docket
You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-9387; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Office (telephone 800-647-5527) is Docket Management Facility, U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT:
Aziz Ahmed, Aerospace Engineer, Airframe and Mechanical Systems Branch, ANE-171, FAA, New York Aircraft Certification Office (ACO), 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7329; fax 516-794-5531.
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Bombardier, Inc., Model BD-100-1A10 airplanes. The NPRM published in the Federal Register on March 23, 2017 (82 FR 14837). The NPRM was prompted by a recent design review of the equipment racks which revealed that the left-hand side (LHS) and right-hand side (RHS) equipment racks were not designed to support the actual weight of all the equipment and the secondary direct current power centers under all loading conditions. The NPRM proposed to require modifying the equipment racks. We are issuing this AD to prevent structural failure of the LHS or RHS equipment racks in the event of a high energy emergency landing or runway excursion, which could result in blockage of the emergency exit for the flightcrew.
Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued Canadian Airworthiness Directive CF-2016-26, dated September 14, 2016 (referred to after this as the Mandatory Continuing Airworthiness Information, or “the MCAI”), to correct an unsafe condition for certain Bombardier, Inc., Model BD-100-1A10 airplanes. The MCAI states:
During a recent design review, a Bombardier equipment supplier discovered that the weight of the Secondary Direct Current (DC) Power Center was incorrectly reported to the structural partner(s) via their equipment interface drawing. Consequently, the left-hand side (LHS) and right-hand side (RHS) equipment racks were not designed to support the actual weight of all the equipment and the Secondary DC Power Centers under all loading conditions. In the event of a high energy emergency landing or runway excursion, the structural failure of the LHS or RHS equipment racks may result in the blockage of the emergency escape route for the pilot(s) and crew if this condition is not corrected.
Required actions include modifying the equipment racks. You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-9387.
Comments
We gave the public the opportunity to participate in developing this AD. We received no comments on the NPRM or on the determination of the cost to the public.
Conclusion
We reviewed the relevant data and determined that air safety and the public interest require adopting this AD as proposed, except for minor editorial changes. We have determined that these minor changes:
- Are consistent with the intent that was proposed in the NPRM for correcting the unsafe condition; and
- Do not add any additional burden upon the public than was already proposed in the NPRM.
Related Service Information Under 1 CFR Part 51
We reviewed Bombardier Service Bulletin 100-25-39, dated October 26, 2015; and Bombardier Service Bulletin 350-25-002, dated October 26, 2015. This service information describes procedures for modifying the equipment racks. These documents are distinct since they apply to airplanes having different serial numbers. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.
Costs of Compliance
We estimate that this AD affects 161 airplanes of U.S. registry.
We estimate the following costs to comply with this AD:
Estimated Costs
Action | Labor cost | Parts cost | Cost per product | Cost on U.S. operators |
---|---|---|---|---|
Modify equipment racks | Up to 10 work-hours × $85 per hour = $850 | $1,755 | Up to $2,605 | Up to $419,405. |
According to the manufacturer, some of the costs of this AD may be covered under warranty, thereby reducing the cost impact on affected individuals. We do not control warranty coverage for affected individuals. As a result, we have included all costs in our cost estimate.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. “Subtitle VII: Aviation Programs,” describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in “Subtitle VII, Part A, Subpart III, Section 44701: General requirements.” Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
1. Is not a “significant regulatory action” under Executive Order 12866;
2. Is not a “significant rule” under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in Alaska; and
4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
List of Subjects in 14 CFR Part 39
- Air transportation
- Aircraft
- Aviation safety
- Incorporation by reference
- Safety
Adoption of the Amendment
Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39—AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD):
2017-12-11 Bombardier, Inc.: Amendment 39-18926; Docket No. FAA-2016-9387; Directorate Identifier 2016-NM-182-AD.
(a) Effective Date
This AD is effective July 20, 2017.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Bombardier, Inc., Model BD-100-1A10 airplanes, certificated in any category, serial numbers (S/Ns) 20003 through 20532 inclusive.
(d) Subject
Air Transport Association (ATA) of America Code 25, Equipment/Furnishings.
(e) Reason
This AD was prompted by a report that the left-hand side (LHS) and right-hand side (RHS) equipment racks were not designed to support the actual weight of all the equipment and the secondary direct current power centers under all loading conditions. We are issuing this AD to prevent structural failure of the LHS or RHS equipment racks in the event of a high energy emergency landing or runway excursion, which could result in blockage of the emergency exit for the flightcrew.
(f) Compliance
Comply with this AD within the compliance times specified, unless already done.
(g) Modification of the Equipment Racks
Within 90 months after the effective date of this AD, do the modification required by paragraph (g)(1) or (g)(2) of this AD, as applicable.
(1) For airplanes having S/Ns 20003 through 20500 inclusive: Modify the equipment racks having part numbers (P/Ns) K1000070316-003 (LHS) and K1000070316-004 (RHS), in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 100-25-39, dated October 26, 2015.
(2) For airplanes having S/Ns 20501 through 20532 inclusive: Modify the equipment rack having P/N K1000070316-004 (RHS only), in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 350-25-002, dated October 26, 2015.
(h) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, New York Aircraft Certification Office (ACO), ANE-170, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the New York ACO, send it to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.
(2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, New York ACO, ANE-170, FAA; or Transport Canada Civil Aviation (TCCA); or Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature.
(i) Related Information
(1) Refer to Mandatory Continuing Airworthiness Information (MCAI) Canadian Airworthiness Directive CF-2016-26, dated September 14, 2016, for related information. This MCAI may be found in the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-9387.
(2) For more information about this AD, contact Aziz Ahmed, Aerospace Engineer, Airframe and Mechanical Systems Branch, ANE-171, FAA, New York Aircraft Certification Office (ACO), 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7329; fax 516-794-5531.
(j) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
(i) Bombardier Service Bulletin 100-25-39, dated October 26, 2015.
(ii) Bombardier Service Bulletin 350-25-002, dated October 26, 2015.
(3) For service information identified in this AD, contact Bombardier, Inc., 400 Côte-Vertu Road West, Dorval, Québec H4S 1Y9, Canada; telephone: 514-855-5000; fax: 514-855-7401; email: thd.crj@aero.bombardier.com; Internet http://www.bombardier.com.
(4) You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221.
(5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued in Renton, Washington, on June 5, 2017.
Michael Kaszycki,
Acting Manager, Transport Airplane Directorate, Aircraft Certification Service.
[FR Doc. 2017-12169 Filed 6-14-17; 8:45 am]
BILLING CODE 4910-13-P