Agency Information Collection Activities; Submission to OMB for Review and Approval; Comment Request; NSPS for Metal Coil Surface Coating (Renewal)

Download PDF
Federal RegisterDec 27, 2011
76 Fed. Reg. 80929 (Dec. 27, 2011)

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

In compliance with the Paperwork Reduction Act (44 U.S.C. 3501 et seq.), this document announces that an Information Collection Request (ICR) has been forwarded to the Office of Management and Budget (OMB) for review and approval. This is a request to renew an existing approved collection. The ICR which is abstracted below describes the nature of the collection and the estimated burden and cost.

DATES:

Additional comments may be submitted on or before January 26, 2012.

ADDRESSES:

Submit your comments, referencing docket ID number EPA-HQ-OECA-2011-0226, to (1) EPA online using http://www.regulations.gov (our preferred method), or by email to docket.oeca@epa.gov, or by mail to: EPA Docket Center (EPA/DC), Environmental Protection Agency, Enforcement and Compliance Docket and Information Center, Mail Code 28221T, 1200 Pennsylvania Avenue NW., Washington, DC 20460, and (2) OMB at: Office of Information and Regulatory Affairs, Office of Management and Budget (OMB), Attention: Desk Officer for EPA, 725 17th Street NW., Washington, DC 20503.

FOR FURTHER INFORMATION CONTACT:

Learia Williams, Monitoring, Assistance, and Media Programs Division, Office of Compliance, Mail Code 2227A, Environmental Protection Agency, 1200 Pennsylvania Avenue NW., Washington, DC 20460; telephone number: (202) 564-4113; fax number: (202) 564-0050; email address: williams.learia@epa.gov.

SUPPLEMENTARY INFORMATION:

EPA has submitted the following ICR to OMB for review and approval according to the procedures prescribed in 5 CFR 1320.12. On May 9, 2011 (76 FR 26900), EPA sought comments on this ICR pursuant to 5 CFR 1320.8(d). EPA received no comments. Any additional comments on this ICR should be submitted to both EPA and OMB within 30 days of this notice.

EPA has established a public docket for this ICR under docket ID number EPA-HQ-OECA-2011-0226, which is available for public viewing online at http://www.regulations.gov and in person viewing at the Enforcement and Compliance Docket in the EPA Docket Center (EPA/DC), EPA West, Room 3334, 1301 Constitution Avenue NW., Washington, DC. The EPA Docket Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Reading Room is (202) 566-1744, and the telephone number for the Enforcement and Compliance Docket is (202) 566-1752.

Use EPA's electronic docket and comment system at http://www.regulations.gov to submit or view public comments, access the index listing of the contents of the docket, and to access those documents in the docket that are available electronically. Once in the system, select “docket search,” then key in the docket ID number identified above. Please note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing at http://www.regulations.gov as EPA receives them and without change, unless the comment contains copyrighted material, Confidential Business Information (CBI), or other information whose public disclosure is restricted by statute. For further information about the electronic docket, go to http://www.regulations.gov.

Title: NSPS for Metal Coil Surface Coating (Renewal).

ICR Numbers: EPA ICR Number 0660.11, OMB Control Number 2060-0107.

ICR Status: This ICR is scheduled to expire on December 31, 2011. Under OMB regulations, the Agency may continue to conduct or sponsor the collection of information while this submission is pending at OMB. An Agency may not conduct or sponsor, and a person is not required to respond to, a collection of information, unless it displays a currently valid OMB control number. The OMB control numbers for EPA's regulations in title 40 of the CFR, after appearing in the Federal Register when approved, are listed in 40 CFR part 9, are displayed either by publication in the Federal Register or by other appropriate means, such as on the related collection instrument or form, if applicable. The display of OMB control numbers in certain EPA regulations is consolidated in 40 CFR part 9.

Abstract: New Source Performance Standards (NSPS) for the regulations published at 40 CFR part 60, subpart TT were proposed on January 5, 1981 and promulgated on November 1, 1982. These regulations apply to the following surface coating lines in the metal coil surface coating industry: each prime coat operation, each finish coat operation, and each prime and finish coat operation cured simultaneously where the finish coat is applied wet on wet over the prime coat.

In general, all New Source Performance Standards (NSPS) require initial notifications, performance tests, and periodic reports. Owners or operators are also required to maintain records of the occurrence and duration of any startup, shutdown, or malfunction in the operation of an affected facility, or any period during which the monitoring system is inoperative. These notifications, reports, and records are essential in determining compliance, and are required of all sources subject to NSPS.

All reports are sent to the delegated state or local authority. In the event that there is no such delegated authority, the reports are sent directly to the EPA regional office. This information is being collected to assure compliance with 40 CFR part 60, subpart TT, as authorized in sections 112 and 114(a) of the Clean Air Act. The required information consists of emissions data and other information that have been determined to be private.

Burden Statement: The annual public reporting and recordkeeping burden for this collection of information is estimated to average 41 hours per response. Burden means the total time, effort, or financial resources expended by persons to generate, maintain, retain, or disclose or provide information to or for a Federal agency. This includes the time needed to review instructions; develop, acquire, install, and utilize technology and systems for the purposes of collecting, validating, and verifying information, processing and maintaining information, and disclosing and providing information; adjust the existing ways to comply with any previously applicable instructions and requirements which have subsequently changed; train personnel to be able to respond to a collection of information; search data sources; complete and review the collection of information; and transmit or otherwise disclose the information.

Respondents/Affected Entities: Metal coil surface coating facilities.

Estimated Number of Respondents: 158.

Frequency of Response: Initially, occasionally, annually, and semiannually.

Estimated Total Annual Hour Burden: 15,643.

Estimated Total Annual Cost: $1,829,259, which includes $1,497,459 in labor costs, no capital/startup costs, and $331,800 in operation and maintenance (O&M) costs.

Changes in the Estimates: There is no change in the labor hours in this ICR compared to the previous ICR. Consultations with EPA's Office of Air Quality Planning and Standards (OAQPS) and trade associations revealed that there are approximately 158 sources subject to the rule, with no new facilities expected to be constructed over the next three years of this ICR.

However, there is an increase in the estimated burden cost as currently identified in the OMB Inventory of Approved Burdens. The increase is not due to any program changes. The change in burden is due to the use of the most updated labor rates.

Dated: December 20, 2011.

John Moses,

Director, Collection Strategies Division.

[FR Doc. 2011-33129 Filed 12-23-11; 8:45 am]

BILLING CODE 6560-50-P