From Casetext: Smarter Legal Research

Timmerman v. Univ Box Mach Corp.

Michigan Court of Appeals
Nov 19, 1979
287 N.W.2d 316 (Mich. Ct. App. 1979)

Summary

In Timmerman v Universal Corrugated Box Machinery Corp, 93 Mich. App. 680, 686; 287 N.W.2d 316 (1979), a panel of this Court stated that an instruction on comparative negligence would be improper at the retrial of a products liability action based on an alleged failure to provide safety devices on a catwalk in an industrial plant.

Summary of this case from George v. Eaton Corp.

Opinion

Docket No. 78-2068.

Decided November 19, 1979.

Rosenbaum, Bloom, Appel Moses, for plaintiffs.

Vandeveer, Garzia, Tonkin, Kerr Heaphy, P.C. (by James A. Sullivan), for Universal Corrugated Box Machinery Corporation.

Dice, Sweeney, Sullivan Feikens, P.C. (by L. Graham Ward), for Hartford Insurance Company.

Before: T.M. BURNS, P.J., and BRONSON and R.M. MAHER, JJ.


This appeal by the plaintiffs arises from a jury verdict of no cause of action in their products liability suit against the manufacturer of the machine which injured James L. Timmerman (hereinafter "plaintiff").

On June 16, 1970, plaintiff was operating a machine known as a "printer-slotter" for his employer, Stone Container Corporation. The machine prints labels and other material on heavy cardboard and then fabricates same into boxes. The machine is large and utilizes 250-pound rollers. There is a clearance between rollers of 0.007 inches. The rollers require inking and adjustment along their length, which is done from a catwalk approximately five or six feet above the ground and running parallel to the rollers. The catwalk permits the operator of the machine to walk along the length of the rollers to adjust the ink flow from numerous spigots set above and parallel to the rollers and to paddle the rollers to effect uniformity of ink distribution. Constant tension to the rollers is required to avoid loss of costly stock into scrap.

Part of the catwalk adjacent to the rollers is of a web steel construction and is divided into four sections. The rollers and certain other portions of the machine are exposed by opening hinged sections of the aforesaid catwalk in order to facilitate certain adjustments which might be required from time to time. The machine was manufactured by defendant and sold to plaintiff's employer in February, 1969.

At the time of the accident, plaintiff was adjusting the ink flow and moving in a backward direction from one spigot to the next, which was an undisputed appropriate manner of adjusting the ink spigots. At the time in question, a section of the catwalk behind him was open, and as plaintiff continued to move backward, his right foot went through the opening and into the rollers where it was crushed. Eventually, it had to be amputated.

The grate had either been left open by an operator from the previous shift, or by the plaintiff himself, although it is undisputed that at the time of the accident plaintiff was unaware that the grate was open. The machine could only be turned off at ground level. The plaintiff's screams caused another employee to shut off the machine.

Until immediately after the accident, the catwalk sections were not equipped with micro-switches, interlocks, or safety switches which would prevent the machine from being operated while a section of the catwalk was open. There was testimony that such safety switches were feasible and were in use in other applications long before the machine in question was manufactured. Indeed, the plaintiff's employer equipped the catwalk with such devices at a comparatively modest cost immediately after the plaintiff's accident.

The Timmermans sued the manufacturer of the machine, alleging improper design and construction for failure to provide safety devices. They also alleged breach of implied warranty of fitness, contending that the machine was unreasonably hazardous and, therefore, unfit for the purposes intended. The defendant, over the Timmerman's objections, was permitted to join Hartford Insurance Company, the worker's compensation insurance carrier for plaintiff's employer, as a third-party defendant, on the theory of negligent inspection.

On appeal, the Timmermans allege various instructional errors as bases for reversal.

In his jury instructions on the negligence count, the trial judge included an instruction on the plaintiff's contributory negligence. Later, when instructing on the breach of warranty claim, he did not mention contributory negligence. When the instructions were concluded, but before the jury retired to deliberate, plaintiff's counsel requested that the trial judge clarify the jury instructions on breach of warranty to say that the plaintiff's contributory negligence cannot be considered with respect to that count. The trial judge denied this request.

Contributory negligence is not a defense to a breach of warranty action. Kujawski v Cohen, 56 Mich. App. 533, 542; 224 N.W.2d 908 (1974), Dooms v Stewart Bolling Co, 68 Mich. App. 5, 16-17; 241 N.W.2d 738 (1976).

It is erroneous to refuse to give requested jury instructions which correctly state the law applicable to the facts, unless such requests are covered by the general charge in a fair and adequate manner. Holbert v Staniak, 359 Mich. 283, 291; 102 N.W.2d 186 (1960), Richman v City of Berkley, 84 Mich. App. 258, 264; 269 N.W.2d 555 (1978). The error requires reversal if it might have altered the result, or if this Court can say that the result might well have been different. Richman v City of Berkley, supra.

Since the plaintiff's claims of negligence and breach of warranty were so closely related and depended on an identical factual development, the jury may have been confused and considered the contributory negligence defense with respect to the breach of warranty count as well as the negligence count. The trial court should have given the clarifying instruction as requested by plaintiff's counsel. This is the type of error which may well have affected the result, and therefore requires reversal.

Our analysis of this issue cannot stop here, however, since there exists a more fundamental error requiring reversal. In the recent decision of Tulkku v Mackworth Rees Division of Avis Industries, Inc, 406 Mich. 615; 281 N.W.2d 291 (1979), the Michigan Supreme Court extended the rule of Funk v General Motors Corp, and concluded that contributory negligence is no defense to a plaintiff's recovery where evidence has been presented of a defendant's causal negligence in the design or manufacture of a safety device.

392 Mich. 91; 220 N.W.2d 641 (1974), holding that contributory negligence is not a defense where the plaintiff's injuries resulted from the defendant employer's failure to provide any safety device. The Court in Funk, based its decision on policy considerations, saying that workers are not in a position to protect themselves and have no choice but to work with the equipment at hand. Employers are therefore required to safeguard workers from injury caused by faulty or inadequate equipment and cannot shield themselves from liability by pointing to the worker's negligence in using such equipment.

The policy reason upon which this conclusion is based was summarized by the Court, 406 Mich at 623:
"If we are to continue to foster the protection of the worker and to encourage manufacturers to take all reasonable precautions in designing and manufacturing safety devices, we cannot allow the discredited doctrine of contributory negligence to undermine these goals."

In the case at bar, the plaintiffs' assertion of negligence was based on Universal's failure to equip the "printer-slotter" with a shut-off device, buzzers, or other safety devices. There was evidence of the ready availability and comparatively low price of such safety devices, as well as their subsequent installation by the plaintiff's employer. Therefore, under Tulkku, supra, it was reversible error for the trial court to instruct the jury on contributory negligence with respect to the negligence count. The plaintiffs are entitled to a new trial.

In Tulkku, the Supreme Court declined to consider the effect of comparative negligence which was adopted in Michigan by the enactment of MCL 600.2945; MSA 27A.2945 and by the decision in Placek v Sterling Heights, 405 Mich. 638; 275 N.W.2d 511 (1979). Since this issue will necessarily arise at the new trial, we must address it here. In view of the policy reasons underlying the Funk and Tulkku decisions, being the fostering of worker protection and encouragement of employers and manufacturers to provide proper and adequate safety equipment, it seems to us that the employee's negligence cannot be raised as a defense, whether it be under a doctrine of contributory negligence or comparative negligence.

We find that the other issues raised by the plaintiffs are without merit.

Reversed and remanded for a new trial.


Summaries of

Timmerman v. Univ Box Mach Corp.

Michigan Court of Appeals
Nov 19, 1979
287 N.W.2d 316 (Mich. Ct. App. 1979)

In Timmerman v Universal Corrugated Box Machinery Corp, 93 Mich. App. 680, 686; 287 N.W.2d 316 (1979), a panel of this Court stated that an instruction on comparative negligence would be improper at the retrial of a products liability action based on an alleged failure to provide safety devices on a catwalk in an industrial plant.

Summary of this case from George v. Eaton Corp.

In Timmerman, this Court stated that comparative negligence would not apply at the retrial in a products liability action based on an alleged failure to provide safety equipment in a catwalk in an industrial plant.

Summary of this case from Wells v. Coulter Sales, Inc.
Case details for

Timmerman v. Univ Box Mach Corp.

Case Details

Full title:TIMMERMAN v UNIVERSAL CORRUGATED BOX MACHINERY CORPORATION

Court:Michigan Court of Appeals

Date published: Nov 19, 1979

Citations

287 N.W.2d 316 (Mich. Ct. App. 1979)
287 N.W.2d 316

Citing Cases

Wells v. Coulter Sales, Inc.

In the instant case, as in Rivers, the machinery used by the injured person was equipped with safety…

Vincent v. Allen Bradley Co.

Thus, where the harm that has befallen a plaintiff is directly within the risk of the defect against which…