Opinion
Docket No. 328253.
01-03-2017
BRUNT ASSOCIATES, INC. v. DEPARTMENT OF TREASURY (ON RECONSIDERATION).
Fraser Trebilcock Davis & Dunlap, PC (by Paul V. McCord), for petitioner. Bill Schuette, Attorney General, Aaron D. Lindstrom, Solicitor General, Matthew Schneider, Chief Legal Counsel, and Randi M. Merchant, Assistant Attorney General, for respondent.
Fraser Trebilcock Davis & Dunlap, PC (by Paul V. McCord), for petitioner.
Bill Schuette, Attorney General, Aaron D. Lindstrom, Solicitor General, Matthew Schneider, Chief Legal Counsel, and Randi M. Merchant, Assistant Attorney General, for respondent.
Before: OWENS, P.J., and HOEKSTRA and BECKERING, JJ.
ON RECONSIDERATION
PER CURIAM.
Petitioner, Brunt Associates, Inc., appeals by right a final order and judgment of the Michigan Tax Tribunal holding petitioner liable for a use-tax deficiency. At the time of the hearing, petitioner owed $305,234.52 in use tax, plus accruing interest. For the reasons stated in this opinion, we affirm the tribunal's decision.
I. Statement of Facts
Petitioner is a domestic for-profit company in the business of producing and installing custom office furnishings and interior finishes—such as custom cabinetry, decorative panels, and freestanding furniture—for commercial applications. In August 2006, respondent, the Department of Treasury, opened a sales-and use-tax audit of petitioner's books that eventually covered the period November 1, 2005 through December 31, 2009. The auditor found that petitioner had reported no use tax during the audit period and had actually remitted sales tax for the business, instead of the appropriate use tax. The auditor further found that petitioner is a real property contractor that did not make any sales at retail and concluded that petitioner owed $284,082 in use tax, plus $41,674 in interest, for a total of $325,756. On September 28, 2010, respondent issued petitioner a notice of intent to assess, followed by a final assessment on December 7, 2010.
On May 5, 2014, respondent amended the audit using additional information provided by petitioner. The amendment resulted in a $21,152.52 increase in use tax owed, bringing petitioner's total use-tax deficit to $305,236, excluding interest.
On October 9, 2013, petitioner filed a verified petition in the Tax Tribunal, alleging that it did not owe use taxes, that it had not engaged in activity during the audit period that would produce use taxes, and that the transactions for which the auditor had assessed use taxes involved customers with tax exemptions. In a prehearing statement submitted several months later, petitioner alleged that it was an industrial processor, that it made sales of tangible personal property at retail, and that it made retail sales to tax-exempt customers. With the tribunal's permission, petitioner amended its petition to accord with its prehearing claims. Petitioner further indicated that the "furniture, fixtures, cabinets, shelves, and decorative panels" it installs retain the character of tangible personal property after installation, are removable without impairing the value of the realty, and do not serve the function of the realty. Respondent answered by calling attention to petitioner's response to a question in respondent's first set of interrogatories in which petitioner stated that it was a "carpentry contractor" and "does not sell products, only carpentry services." Petitioner moved to withdraw and amend its answers to respondent's first set of interrogatories. The tribunal denied petitioner's request, but allowed the amended answers to remain part of the record as supplemental responses.
The timeliness of the petition is not at issue. Respondent mailed the final assessment to petitioner's address of record in December 2010. However, respondent did not mail the final assessment to petitioner's authorized representative. In Fradco, Inc. v. Dep't of Treasury, 495 Mich. 104, 113–115, 845 N.W.2d 81 (2014), Michigan's Supreme Court held that the appeal period from a final assessment did not begin to run until the respondent provided actual notice to both the taxpayer, MCL 205.28(1)(a), and the taxpayer's personal representative as provided in the taxpayer's written request, MCL 205.8. For this reason, the appeals period in the instant case began to run on September 19, 2013, the date petitioner's representative received actual notice of the final assessment. Therefore, the petition in this case was timely.
At the tribunal hearing, Brian Brunt, petitioner's manager, explained that petitioner is a "finish carpentry contractor" that produces and installs custom office furnishings and interior finishes, such as reception desks, nurses stations, cabinets, and finished components for break rooms, typically in consultation with a design team. He explained that petitioner manufactures the custom-ordered pieces in its workshop, delivers them to jobsites, and uses its own workforce to install them. Brunt said that some of the furnishings and finishes were attached to customers' buildings with screws, bolts, clips, or fasteners, but could be removed without damaging the realty. Larger freestanding furnishings, such as reception desks, although transported in sections, reassembled at the job site, and held in place by their size and weight, could also be removed without causing damage. Brunt surmised from his experience working with the general contractors and interior designers that they had not intended for petitioner's products to be permanent affixations to realty. Brunt explained that petitioner's furnishings, cabinets, and wall panels were decorative and that nothing required engineer's drawings or structural approval.
David Rea, petitioner's accountant, testified that, based on his knowledge, petitioner was a manufacturer/retailer, not a manufacturer/contractor. He opined that the items petitioner sells to customers meet the definition of tangible personal property under the General Sales Tax Act (GSTA), MCL 205.78 et seq. , and that the definition of tangible personal property was essentially identical under the Use Tax Act (UTA), MCL 205.91 et seq. He further opined that things that could be moved and put into a different room had nothing to do with constructing, altering, or repairing real estate.
Testifying with regard to her audit findings, respondent's auditor, Stephanie R. Mitchell, said she determined that petitioner was a contractor and not a retailer from the initial audit conference with Rea, in which she was informed that petitioner did not maintain an inventory, provide a publication list or price list, or make retail sales. She also based her determination on the nature of petitioner's business activities and her conclusion that the items fabricated by petitioner did not retain their character as tangible personal property because petitioner affixed the items to the realty of its customers. She testified that she derived her understanding of petitioner's business from petitioner's business classification, a discussion with Rea, a review of petitioner's website explaining their business activities, and a discussion with her supervisor. The auditor denied that her conclusion that petitioner was a contractor would change even if certain pieces of furniture and equipment were not attached to realty, and she affirmed that freestanding desks and other items would be considered permanently affixed to realty for purposes of the audit.
Both parties submitted posthearing briefs, summing up the arguments they had advanced at the hearing. Petitioner argued that it was a retailer because it manufactured tangible personal property for sale, with installation, for the use and consumption of its customers. Petitioner further argued that it was entitled to an industrial-processor exemption because it "changes the form, composition, quality, combination or character of tangible personal property for ultimate sale at retail." Finally, petitioner asserted that it was not a contractor because "the manufactured products never become a permanent affixation to the realty after installation." Respondent argued that petitioner was a real-property contractor and was not entitled to an industrial-processing exemption because it did not ultimately sell its products at retail.
In a written opinion and judgment, the tribunal found that petitioner affixed its products to the realty of its customers, either actually or constructively, and concluded that petitioner is a contractor liable for use tax on all its products, regardless of how they were affixed to customers' realty. The tribunal further concluded that petitioner was not entitled to an industrial-processing exemption, and it affirmed respondent's final use-tax assessment of $305,234.52 plus interest. After the tribunal denied petitioner's motion for reconsideration, petitioner filed a timely appeal in this Court.
II. ANALYSIS
Petitioner first contends that the tribunal erred by concluding that it was a construction contractor engaged in the business of constructing, altering, repairing, or improving the real estate of others. We disagree. Because fraud has not been asserted, our "review of a decision by the Tax Tribunal is limited to determining whether the tribunal erred in applying the law or adopted a wrong principle; its factual findings are conclusive if supported by competent, material, and substantial evidence on the whole record." Mich. Bell Tel. Co. v. Dep't of Treasury, 445 Mich. 470, 476, 518 N.W.2d 808 (1994). "Substantial evidence must be more than a scintilla of evidence, although it may be substantially less than a preponderance of the evidence required in most civil cases." Dow Chem. Co. v. Dep't of Treasury, 185 Mich.App. 458, 463, 462 N.W.2d 765 (1990). To the extent that resolution of an issue involves a question of statutory interpretation, review is de novo, with the agency's interpretation given " respectful consideration." Devonair Enterprises, LLC v. Dep't of Treasury, 297 Mich.App. 90, 96, 823 N.W.2d 328 (2012). Under MCL 205.93(1) of the UTA, every person in Michigan who purchases tangible personal property is subject to a use tax "for the privilege of using, storing, or consuming tangible personal property in this state...." "The provisions of the [UTA] complement those of the [GSTA] and were generally designed to avoid the imposition of both use and sales tax on the same property." Granger Land Dev. Co. v. Dep't of Treasury, 286 Mich.App. 601, 608, 780 N.W.2d 611 (2009). Therefore, a person who purchases property for resale is exempt from paying use tax as long as the purchaser does in fact resell the property. MCL 205.94(1)(c)(i ) and (2). Exemption statutes are strictly construed in favor of the taxing unit. Mich. Baptist Homes & Dev. Co. v. City of Ann Arbor, 396 Mich. 660, 670, 242 N.W.2d 749 (1976). "[T]he burden is on a claimant to establish clearly his right to exemption, and an alleged grant of exemption will be strictly construed and cannot be made out by inference or implication but must be beyond reasonable doubt." Evanston YMCA Camp v. State Tax Comm., 369 Mich. 1, 8, 118 N.W.2d 818 (1962) (quotation marks and citation omitted).
For purposes of the UTA, the term "person" includes firms. MCL 205.92(a).
It is undisputed that petitioner is a manufacturer. The question is whether petitioner is a retailer liable only for sales tax or a contractor liable for use tax. Neither the GSTA nor the UTA define "contractor"; however, Mich. Admin. Code R. 205.71 provides the following guidance:
(1) "Contractor" includes only prime, general, and subcontractors directly engaged in the business of constructing, altering, repairing, or improving real estate for others.
* * *
(6) Where a manufacturer affixes his product to real estate for others, he qualifies as a contractor and shall remit use tax on the inventory value of the property at the time the property is converted to the contract which value shall include all costs of manufacturing, fabricating, and processing.
The dispositive issue with regard to whether petitioner is a contractor is whether petitioner "affixes [its] product to real estate for others." Mich Admin. Code R. 205.71(6).
Petitioner argues that it is not a contractor because, although it affixes some of its furnishings and finishes to the real estate of its customers by using bolts, clips, fasteners, or screws, these products, as well as its freestanding furniture, can easily be removed without damaging the product or diminishing the value of the customer's realty. However, contrary to petitioner's implication, that an item is removable is not dispositive of whether it is attached to realty. See Miedema Metal Bldg. Sys., Inc. v. Dep't of Treasury, 127 Mich.App. 533, 338 N.W.2d 924 (1983) (affirming that grain bins bolted to a concrete foundation but easily removable were attached to realty nonetheless). The unobtrusiveness of the hardware petitioner uses to attach its products and the alleged ease and speed with which its products, whether attached or freestanding, can be removed in no way negates the fact that petitioner physically attaches some of its products to its customers' buildings and constructively attaches others. See Velmer v. Baraga Area Sch., 430 Mich. 385, 395, 424 N.W.2d 770 (1988) (indicating that, although not bolted to the floor, the milling machine at issue was constructively "affixed" to realty by reason of its weight).
In like vein, petitioner asserts that its products retained their character of tangible personal property after installation,and petitioner contends that the tribunal committed legal error when it failed to use the "3–part fixture test" to determine whether petitioner's products were sufficiently attached to its customers' realty to consider them as part of the realty. We conclude that this argument is without merit.
To determine whether personal property is sufficiently affixed to real property such that it should be treated as part of the realty, Michigan courts examine:
"(1) whether the property was actually or constructively annexed to the real estate; (2) whether the property was adapted or applied to the use or purpose of that part of the realty to which the property in question is connected or appropriated; and (3) whether the property owner intended to make the property a permanent accession to the realty." [Granger Land Dev. Co., 286 Mich.App. at 611, 780 N.W.2d 611, quoting Tuinier v. Bedford Charter Twp., 235 Mich.App. 663, 668, 599 N.W.2d 116 (1999) ; see also Sequist v. Fabiano, 274 Mich. 643, 645, 265 N.W. 488 (1936).]
In the case at bar, the first two prongs of this test were not in dispute. Brunt testified that petitioner's products were physically attached to customers' realty with screws, bolts, clips or fasteners, or constructively attached by means of the products' size or weight. In addition, Brunt testified that petitioner manufactures products to fit the specific needs and space of its customers, which indicates that the petitioner's products were adapted to the use or purpose of that part of the customers' buildings to which they were attached.
That petitioner's products were intended to be permanent accessions to realty is clear from the nature of the products (wall paneling, lecture hall desks, large nurses' stations, etc.), the essential functions they fulfill in the businesses of petitioner's customers, and their actual or constructive attachment to customers' buildings. Further, petitioner testified that, once attached, its products are rarely removed, and then only for repair, after which they are reinstalled. See Tuinier v. Bedford Charter Twp., 235 Mich.App. 663, 668, 599 N.W.2d 116 (1999) (noting that, with regard to intent, the "permanence required is not equated with perpetuity. It is sufficient if the item is intended to remain where affixed until worn out, until the purpose to which the realty is devoted is accomplished or until the item is superseded by another item more suitable for the purpose") (quotation marks and citation omitted). On these facts, the tribunal found that petitioner is a contractor who affixed its products to realty and is subject to use tax under Mich. Admin. Code R. 205.71(6).
In light of the foregoing, we conclude that the tribunal's finding that petitioner manufactures product that it affixes to the real estate of others, either actually or constructively, is conclusive because it is supported by competent, material, and substantial evidence on the whole record. Mich. Bell Tel. Co., 445 Mich. at 476, 518 N.W.2d 808. We further conclude that the tribunal did not err by applying the law or adopt a wrong principle when it concluded that petitioner is a "manufacturer" and " contractor" that "affixes [its] product to real estate for others" and is " directly engaged in the business of constructing, altering, repairing, or improving real estate for others." Mich Admin. Code R. 205.71.
Petitioner next contends that the tribunal erred by denying its claim to an industrial-processing exemption and by failing to apportion its industrial-processing claim properly. We disagree.
An industrial-processing exemption "is limited to the percentage of exempt use to total use determined by a reasonable formula or method approved by the department [of treasury]." MCL 205.94o(2).
--------
We first turn to the question whether petitioner is entitled to an industrial-processing exemption. MCL 205.94o of the UTA exempts from the use tax property sold to persons engaged in industrial processing. MCL 205.94o(7) provides the following relevant definitions:
(a) "Industrial processing" means the activity of converting or conditioning tangible personal property by changing the form, composition, quality, combination, or character of the property for ultimate sale at retail or for use in the manufacturing of a product to be ultimately sold at retail or affixed to and made a structural part of real estate located in another state....
(b) "Industrial processor" means a person who performs the activity of converting or conditioning tangible personal
property for ultimate sale at retail or use in the manufacturing of a product to be ultimately sold at retail or affixed to and made a structural part of real estate located in another state.
Property that is not eligible for an industrial-processing exemption includes "[t]angible personal property permanently affixed and becoming a structural part of real estate...." MCL 205.94o(5)(a). Petitioner contends that it is an industrial processor because it converts or conditions tangible personal property for ultimate sale at retail. Petitioner further contends that the exception to the industrial-processing exemption does not apply to it because its products, even if affixed, are not a "structural part of real estate."
However, as already explained, petitioner does not manufacture products for "ultimate sale at retail," and there is no record evidence that petitioner manufactures products for "use in the manufacturing of a product to be ultimately sold at retail or affixed to and made a structural part of real estate located in another state." MCL 205.94o(7)(b). Consequently, petitioner does not meet the statutory criteria for characterization as an "industrial processor." Because petitioner is not an industrial processor, we need not address the issue of apportionment under MCL 205.94o(2).
Affirmed.
OWENS, P.J., and HOEKSTRA and BECKERING, JJ., concurred.