S.C. Code Regs. § § 61-62.5.5.2.V

Current through Register Vol. 48, No. 10, October 25, 2024

Section 61-62.5.5.2.V - STANDARD REQUIREMENTS FOR EXISTING AFFECTED SOURCES

(A) For those affected sources subject to the requirements of this regulation as defined in Section I(A)(2) above where an existing burner assembly is replaced after the effective date of this regulation, the burner assembly shall be replaced with a low-NO_X burner assembly or equivalent technology, and shall achieve a thirty (30) percent reduction from uncontrolled NO_X emission levels based upon manufacturer's specifications. An exemption from this requirement shall be granted when a single burner assembly is being replaced in an affected source with multiple burners due to non-routine maintenance.

(B) For those sources defined in Section I(A)(2) above where an existing burner assembly is replaced after the effective date of this regulation, the owner or operator shall notify and register the replacement with the Department in accordance with Section VI below.

(C) An affected source may request an alternative control methodology to the one specified in paragraph (A) above of this section provided that they can demonstrate to the Department why the NO_X control limits specified are not economically or technically feasible for this specific circumstance. The Department reserves the right to request that the owner or operator submit additional information as necessary for the alternative control methodology determination. Alternative control methodologies granted under this part are not effective until notification is submitted to and approved by the Department.

S.C. Code Regs. § 61-62.5.5.2.V

Amended by State Register Volume 40, Issue No. 06, eff. 6/24/2016; State Register Volume 44, Issue No. 04, eff. 4/24/2020.