46 C.F.R. § 153.1608

Current through October 31, 2024

Section 153.1608 - Calculation of total NLS residue and clingage NLS residue

(a) The total NLS residue for each tank is calculated by adding the stripping quantity and the clingage NLS residue.

(b) The clingage NLS residue for each tank is calculated using the following formula:

Q_clingage = 1.1 * 10^-4 A_d + 1.5 * 10^-5 A_w + 4.5 * 10^-4 L ¹/₂ A_b

where:

A_b = Area of the tank bottom added to the area in square meters of tank structural components projected on a horizontal surface

A_d = Area of the tank underdecks added to the area in square meters of tank structural components projected on a horizontal surface

A_w = Area of the tank walls added to the area in square meters of tank structural components projected on a vertical surface

L = Length of tank in meters from fore to aft

Q_clingage = volume of clingage in cubic meters

When using the formula in this paragraph, areas that are inclined more than 30° from the horizontal may be assumed to be vertical.

46 C.F.R. §153.1608

CGD 81-101, 52 FR 7788, Mar. 12, 1987, as amended by USCG-2006-25697, 71 FR 55747 , Sept. 25, 2006; USCG-2012-0832, 77 FR 59785 , Oct. 1, 2012

The Commandant (CG-ENG) (telephone number 202-372-1420) has information that may be useful in approximating surface areas of typical structural members for the projected area calculations under § 153.1608.