Section 650.509 - Qualifications of personnel(a) A Program Manager shall, at a minimum:(1) Be a registered Professional Engineer, or have 10 years of tunnel or bridge inspection experience;(2) Be a nationally certified tunnel inspector;(3) Satisfy the requirements of paragraphs (a)(1) and (2) of this section by August 13, 2017; and(4) Be able to determine when a Team Leader's qualifications must meet the requirements of paragraph (b)(1)(i) of this section in accordance with the FHWA approved process developed in accordance with § 650.507(e)(4) .(b) A Team Leader shall, at a minimum: (1) Meet at least one of the four qualifications listed in paragraphs (b)(1)(i) through (iv) of this section: (i) Be a registered professional engineer and have six months of tunnel or bridge inspection experience.(ii) Have 5 years of tunnel or bridge inspection experience.(iii) Have all of the following:(A) A bachelor's degree in engineering or engineering technology from a college or university accredited or determined as substantially equivalent by the Accreditation Board for Engineering and Technology.(B) Successfully passed the National Council of Examiners for Engineering and Surveying Fundamentals of Engineering examination.(C) Two (2) years of tunnel or bridge inspection experience.(iv) Have all of the following: (A) An associate's degree in engineering or engineering technology from a college or university accredited or determined as substantially equivalent by the Accreditation Board for Engineering and Technology.(B) Four years of tunnel or bridge inspection experience.(2) Be a nationally certified tunnel inspector.(3) Provide documentation supporting the satisfaction of paragraphs (b)(1) and (2) of this section to the Program Manager of each State DOT, Federal agency, or tribal government for which they are performing tunnel inspections.(4) Be a registered Professional Engineer and have six months of tunnel or bridge inspection experience if the Program Manager determines through the approved process developed under § 650.507(e)(4) that the tunnel being inspected is complex or has distinctive features or functions that warrant this level of qualifications.(c) Load ratings shall be performed by, or under the direct supervision of, a registered Professional Engineer.(d) Each State DOT, Federal agency, and tribal government shall determine inspection personnel qualifications for damage, cursory, and special inspections.(e) A nationally certified tunnel inspector shall:(1) Complete an FHWA-approved comprehensive tunnel inspection training course and score 70 percent or greater on an end-of-course assessment;(2) Complete a cumulative total of 18 hours of FHWA-approved tunnel inspection refresher training over each 60 month period; and(3) Maintain documentation supporting the satisfaction of paragraphs (e)(1) and (2) of this section, and, upon request, provide documentation of their training status and current contact information to the Tunnel Inspection Organization of each State DOT, Federal agency, or tribal government for which they will be performing tunnel inspections.(f) Acceptable tunnel inspection training includes the following: (1)National Highway Institute training. NHI courses on comprehensive tunnel inspection training.(2)FHWA approval of alternate training. A State DOT, Federal agency, or tribal government may submit to FHWA a training course as an alternative to the NHI course. The FHWA shall approve alternative course materials and end-of-course assessments for national consistency and certification purposes. The Program Manager shall review the approved alternative training course every 5 years to ensure the material is current. Updates to approved course materials and end-of-course assessments shall be resubmitted to FHWA for approval.(g) In evaluating the tunnel inspection experience requirements under paragraphs (a) and (b) of this section, a combination of tunnel design, tunnel maintenance, tunnel construction, and tunnel inspection experience, with the predominant amount in tunnel inspection, is acceptable. Also, the following criteria should be considered:(1) The relevance of the individual's actual experience, including the extent to which the experience has enabled the individual to develop the skills needed to properly lead a tunnel safety inspection.(2) The individual's exposure to the problems or deficiencies common in the types of tunnels being inspected by the individual.(3) The individual's understanding of the specific data collection needs and requirements.