Opinion
Civil Action No. 2:13-cv-23829
05-02-2016
JULIE TWOMBLY, Plaintiff, v. BOSTON SCIENTIFIC CORP., Defendant.
MEMORANDUM OPINION AND ORDER
(Defendant's Motion for Summary Judgment)
Pending before the court is Defendant Boston Scientific Corporation's Motion for Summary Judgment and Memorandum in Support Against Plaintiff Julie Twombly ("Motion") [Docket 38]. As set forth below, BSC's Motion is GRANTED IN PART with respect to the plaintiff's claims of strict liability for manufacturing defect, strict liability for failure to warn, negligent manufacturing, and negligent failure to warn. BSC's Motion is DENIED IN PART with respect to the plaintiff's claims of strict liability for design defect and negligent design and DENIED as moot as to the plaintiff's claims for breach of express and implied warranty.
I. Background
This case resides in one of seven MDLs assigned to me by the Judicial Panel on Multidistrict Litigation concerning the use of transvaginal surgical mesh to treat pelvic organ prolapse ("POP") and stress urinary incontinence ("SUI"). In the seven MDLs, there are nearly 75,000 cases currently pending, over 19,000 of which are in the Boston Scientific Corp. ("BSC") MDL, MDL 2326. In an effort to efficiently and effectively manage this massive MDL, I decided to conduct pretrial discovery and motions practice on an individualized basis so that once a case is trial-ready (that is, after the court has ruled on all Daubert motions and summary judgment motions, among other things), it can then be promptly transferred or remanded to the appropriate district for trial. To this end, I ordered the plaintiffs and defendant to each select 50 cases, which would then become part of a "wave" of cases to be prepared for trial and, if necessary, remanded. (See Pretrial Order # 65, In re Boston Scientific Corp. Pelvic Repair Sys. Prods. Liab. Litig., No. 2:12-md-002326, entered Dec. 19, 2013, available at http://www.wvsd.uscourts.gov/MDL/boston/orders.html). This selection process was completed twice, creating two waves of 100 cases, Wave 1 and Wave 2. Ms. Twombly's case was selected as a Wave 2 case by BSC.
On July 16, 2008, Ms. Twombly was surgically implanted with the Obtryx Transobturator Mid-Urethral Sling System (the "Obtryx"), a product manufactured by BSC to treat SUI. She received her surgery at a hospital in Athens, Texas. Ms. Twombly claims that as a result of implantation of the Obtryx, she has experienced multiple complications. She brings the following claims against BSC: strict liability for design defect, manufacturing defect, and failure to warn; negligence; breach of express and implied warranties; and punitive damages. (Short Form Compl. [Docket 1], at 5).
II. Legal Standards
A. Summary Judgment
To obtain summary judgment, the moving party must show that there is no genuine dispute as to any material fact and that the moving party is entitled to judgment as a matter of law. Fed. R. Civ. P. 56(a). In considering a motion for summary judgment, the court will not "weigh the evidence and determine the truth of the matter." Anderson v. Liberty Lobby, Inc., 477 U.S. 242, 249 (1986). Instead, the court will draw any permissible inference from the underlying facts in the light most favorable to the nonmoving party. Matsushita Elec. Indus. Co. v. Zenith Radio Corp., 475 U.S. 574, 587-88 (1986).
Although the court will view all underlying facts and inferences in the light most favorable to the nonmoving party, the nonmoving party nonetheless must offer some "concrete evidence from which a reasonable juror could return a verdict" in his or her favor. Anderson, 477 U.S. at 256. Summary judgment is appropriate when the nonmoving party has the burden of proof on an essential element of his or her case and does not make, after adequate time for discovery, a showing sufficient to establish that element. Celotex Corp. v. Catrett, 477 U.S. 317, 322-23 (1986). The nonmoving party must satisfy this burden of proof by offering more than a mere "scintilla of evidence" in support of his or her position. Anderson, 477 U.S. at 252. Likewise, conclusory allegations or unsupported speculation, without more, are insufficient to preclude the granting of a summary judgment motion. See Dash v. Mayweather, 731 F.3d 303, 311 (4th Cir. 2013); Stone v. Liberty Mut. Ins. Co., 105 F.3d 188, 191 (4th Cir. 1997).
B. Choice of Law
Under 28 U.S.C. § 1407, this court has authority to rule on pretrial motions in MDL cases. The choice of law for these pretrial motions depends on whether they concern federal or state law:
When analyzing questions of federal law, the transferee court should apply the law of the circuit in which it is located. When considering questions of state law, however, the transferee court must apply the state law that would have applied to the individual cases had they not been transferred for consolidation.In re Temporomandibular Joint (TMJ) Implants Prods. Liab. Litig., 97 F.3d 1050, 1055 (8th Cir. 1996) (internal citations omitted). To determine the applicable state law for a dispositive motion, I generally refer to the choice-of-law rules of the jurisdiction where the plaintiff first filed her claim. See In re Air Disaster at Ramstein Air Base, Ger., 81 F.3d 570, 576 (5th Cir. 1996) ("Where a transferee court presides over several diversity actions consolidated under the multidistrict rules, the choice of law rules of each jurisdiction in which the transferred actions were originally filed must be applied."); In re Air Crash Disaster Near Chi., Ill., 644 F.2d 594, 610 (7th Cir. 1981); In re Digitek Prods. Liab. Litig., MDL No. 2:08-md-01968, 2010 WL 2102330, at *7 (S.D. W. Va. May 25, 2010).
If a plaintiff files her claim directly into the MDL in the Southern District of West Virginia, however, as Ms. Twombly did in this case, I consult the choice-of-law rules of the state in which the plaintiff was implanted with the product. See Sanchez v. Boston Scientific Corp., 2:12-cv-05762, 2014 WL 202787, at *4 (S.D. W. Va. Jan. 17, 2014) ("For cases that originate elsewhere and are directly filed into the MDL, I will follow the better-reasoned authority that applies the choice-of-law rules of the originating jurisdiction, which in our case is the state in which the plaintiff was implanted with the product."). Ms. Twombly received the Obtryx implantation surgery in Texas. Thus, the choice-of-law principles of Texas guide this court's choice-of-law analysis.
The parties agree, as does this court, that these principles compel application of Texas law to the plaintiff's claims. In tort actions, Texas adheres to the Restatement (Second) of Conflict of Laws (Am. Law Inst. 1971). Gutierrez v. Collins, 583 S.W.2d 312, 318 (Tex. 1979). Under section 145 of the Restatement (Second) of Conflict of Laws, the court must apply the law of the state with the most "significant relationship to the occurrence and the parties." Here, Ms. Twombly resides in Texas, and the product was implanted in Texas. Thus, I apply Texas's substantive law to this case.
III. Analysis
A. Strict Liability
Texas has adopted the doctrine of strict liability for defective products set forth in section 402A of the Restatement (Second) of Torts. See McKisson v. Sales Affiliates, Inc., 416 S.W.2d 787, 789 (Tex. 1967). Section 402A provides:
(1) One who sells any product in a defective condition unreasonably dangerous to the user or consumer or to his property is subject to liability for physical harm thereby caused to the ultimate user or consumer, or to his property, if
(a) the seller is engaged in the business of selling such a product, and
(b) it is expected to and does reach the user or consumer without substantial change in the condition in which it is sold.
(2) The rule stated in Subsection (1) applies although
Restatement (Second) of Torts § 402A. "The concept of defect is central to a products liability action brought on a strict tort liability theory, whether the defect be in conscious design, or in the manufacture of the product, or in the marketing of the product." Turner v. Gen. Motors Corp., 584 S.W.2d 844, 847 (Tex. 1979).(a) the seller has exercised all possible care in the preparation and sale of his product, and
(b) the user or consumer has not bought the product from or entered into any contractual relation with the seller.
1. Statutory Defense
BSC argues that Chapter 82 of the Texas Civil Practice and Remedies Code provides two separate statutory presumptions of non-liability that apply to FDA-regulated prescription medical devices, both of which bar Ms. Twombly's claims. (Mot. [Docket 38], at 8-12). Section 82.008(a) of the Texas Civil Practice and Remedies Code ("Section 82.008(a)") states that:
In a products liability action brought against a product manufacturer or seller, there is a rebuttable presumption that the product manufacturer or seller is not liable for
any injury to a claimant caused by some aspect of the formulation, labeling, or design of a product if the product manufacturer or seller establishes that the product's formula, labeling, or design complied with mandatory safety standards or regulations adopted and promulgated by the federal government, or an agency of the federal government, that were applicable to the product at the time of manufacture and that governed the product risk that allegedly caused harm.Tex. Civ. Prac. & Rem. Code § 82.008(a) (emphasis added).
As I have previously held, the 510(k) process is not a safety statute or administrative regulation. See generally Lewis, et al. v. Johnson & Johnson, et al., 991 F. Supp. 2d 748 (S.D. W. Va. 2014). The Supreme Court determined that "the 510(k) process is focused on equivalence, not safety." Medtronic, Inc. v. Lohr, 518 U.S. 470, 493, 116 S. Ct. 2240 (1996) (internal quotation omitted); see also Riegel v. Medtronic, Inc., 552 U.S. 312, 323, 128 S. Ct. 999 (2008) ("While § 510(k) is focused on equivalence, not safety, premarket approval is focused on safety, not equivalence.") (internal quotation omitted). FDA regulations also state that 510(k) clearance "does not in any way denote official approval of the device." 21 C.F.R. § 807.97. The FDA thus prohibits manufacturers of devices cleared through the 510(k) process from making any representations that their devices have been approved by the FDA. See id. ("Any representation that creates an impression of official approval of a device because of complying with the premarket notification regulations is misleading and constitutes misbranding."). Because the FDA's 510(k) clearance process is not a mandatory safety standard or regulation, I FIND section 82.008(a) inapplicable in this case.
Other courts interpreted Lohr as I do, holding that the 510(k) process does not go to whether a product is safe and effective or impose any requirements on its own. See, e.g., Martin v. Am. Med. Sys., Inc., 116 F.3d 102, 104 (4th Cir. 1997); Bass v. Stryker Corp., 669 F.3d 501, 507 (5th Cir. 2012); Brooks v. Howmedica, Inc., 273 F.3d 785, 794 (8th Cir. 2001); Mack v. Stryker Corp., 893 F. Supp. 2d 976, 985 (D. Minn. 2012); Soufflas v. Zimmer, Inc., 474 F. Supp. 2d 737, 747 n.6 (E.D. Pa. 2007); Nicoll v. I-Flow, LLC, No. 12-1593, 2013 WL 2477032, at *3 (E.D. La. June 7, 2013).
Section 82.008(c) of the Texas Civil Practice and Remedies Code provides as follows:
In a products liability action brought against a product manufacturer or seller, there is a rebuttable presumption that the product manufacturer or seller is not liable for any injury to a claimant allegedly caused by some aspect of the formulation, labeling, or design of a product if the product manufacturer or seller establishes that the product was subject to pre-market licensing or approval by the federal government, or an agency of the federal government, that the manufacturer complied with all of the government's or agency's procedures and requirements with respect to pre-market licensing or approval, and that after full consideration of the product's risks and benefits the product was approved or licensed for sale by the government or agency.Tex. Civ. Prac. & Rem. Code § 82.008(c) (emphasis added). The FDA conducts a full analysis of the product's risks and benefits when a product goes through the premarket approval process, not the 510(k) clearance process. As discussed above, the 510(k) process relates to a medical device's equivalence to a preexisting device; it does not require "full consideration of the product's risks and benefits." Also, as stated above, 510(k) clearance does not constitute FDA "approval" of the device. Therefore, I FIND that section 82.008(c) does not apply to BSC in this case.
2. Manufacturing Defect
To prevail on a manufacturing defect claim, a plaintiff must show "a manufacturing flaw which renders the product unreasonably dangerous[,] that the defect existed at the time the product left the seller, and that the defect was the producing cause of the plaintiff's injuries." Gerber v. Hoffmann-La Roche, Inc., 392 F. Supp. 2d 907, 922 (S.D. Tex. 2005) (citing Dico Tire, Inc. v. Cisneros, 953 S.W.2d 776, 783 (Tex. App. 1997)). BSC argues that the plaintiff has failed to proffer any evidence to support the existence of a manufacturing defect. (Mem. in Supp. [Docket 38], at 13). Because the plaintiff does not oppose BSC's motion for summary judgment on her manufacturing defect claim, BSC's Motion is GRANTED as to that claim.
3. Design Defect
In Texas, a plaintiff bringing a design defect claim under strict liability must prove by a preponderance of the evidence that (1) the product was unreasonably dangerous due to a defect, (2) "there was a safer alternative design," and (3) "the defect was a producing cause" of the damages. Tex. Civ. Prac. & Rem. Code Ann. § 82.005; see also Timpte Indus., Inc. v. Gish, 286 S.W.3d 306, 311 (Tex. 2009). To determine whether a product is unreasonably dangerous, Texas courts apply a risk-utility test that considers the following factors:
(1) the utility of the product to the user and to the public as a whole weighed against the gravity and likelihood of injury from its use; (2) the availability of a substitute product which would meet the same need and not be unsafe or unreasonably expensive; (3) the manufacturer's ability to eliminate the unsafe character of the product without seriously impairing its usefulness or significantly increasing its costs; (4) the user's anticipated awareness of the dangers inherent in the product and their avoidability because of general public knowledge of the obvious condition of the product, or of the existence of suitable warnings or instructions; and (5) the expectations of the ordinary consumer.Am. Tobacco Co. v. Grinnell, 951 S.W.2d 420, 432 (Tex. 1997); see also Hernandez v. Tokai Corp., 2 S.W.3d 251, 256 (Tex. 1999). Whether the product is unreasonably dangerous is generally an issue for the jury. Timpte Indus., 286 S.W.3d at 312; Am. Tobacco, 951 S.W.2d at 432.
BSC argues that comment k to section 402A bars the plaintiff's design defect claim. Comment k exempts certain products from strict liability because they are "unavoidably unsafe." The interpretation and treatment of this exemption varies. Some courts have found that comAment k categorically bars design defect claims for certain medical products. See, e.g., Brown v. Superior Court, 751 P.2d 470, 477 (Cal. 1988) (leading case adopting categorical approach). Thus, in these states, comment k is an absolute bar to design defect claims for particular classes of products. Other courts have adopted a case-by-case approach. See, e.g., Toner v. Lederle Labs., a Div. of Am. Cyanamid Co., 732 P.2d 297, 308 (Idaho 1987) (leading extant case adopting case-by-case approach). Thus, in these states, whether comment k bars a claim for design defect depends on the particular product at hand.
Comment k provides as follows:
Unavoidably unsafe products. There are some products which, in the present state of human knowledge, are quite incapable of being made safe for their intended and ordinary use. These are especially common in the field of drugs. An outstanding example is the vaccine for the Pasteur treatment of rabies, which not uncommonly leads to very serious and damaging consequences when it is injected. Since the disease itself invariably leads to a dreadful death, both the marketing and the use of the vaccine are fully justified, notwithstanding the unavoidable high degree of risk which they involve. Such a product, properly prepared, and accompanied by proper directions and warning, is not defective, nor is it unreasonably dangerous. The same is true of many other drugs, vaccines, and the like, many of which for this very reason cannot legally be sold except to physicians, or under the prescription of a physician. It is also true in particular of many new or experimental drugs as to which, because of lack of time and opportunity for sufficient medical experience, there can be no assurance of safety, or perhaps even of purity of ingredients, but such experience as there is justifies the marketing and use of the drug notwithstanding a medically recognizable risk. The seller of such products, again with the qualification that they are properly prepared and marketed, and proper warning is given, where the situation calls for it, is not to be held to strict liability for unfortunate consequences attending their use, merely because he has undertaken to supply the public with an apparently useful and desirable product, attended with a known but apparently reasonable risk.
As an initial matter, I reject BSC's contention that Texas's absolute bar for FDA-approved prescription drugs, see Carter v. Tap Pharm., Inc., No. SA-03-CA-0182, 2004 WL 2550593, at *2 (W.D. Tex. Nov. 2, 2004) ("Under Texas law, all FDA-approved prescription drugs are unavoidably unsafe as a matter of law."), is applicable here, given that the Obtryx is neither FDA-approved nor a prescription drug. See Lofton v. McNeil Consumer & Speciality Pharm., 682 F. Supp. 2d 662, 679 (N.D. Tex. 2010) (refusing to "take a leap not taken by Texas courts" in applying comment k categorically outside the prescription drug context).
BSC presents no other argument on design defect. Thus, BSC has failed to meet its burden under the summary judgment standard of showing the absence of a genuine dispute as to any material fact. See Fed. R. Civ. P. 56(a); Adickes v. S.H. Kress & Co., 398 U.S. 144, 157 (1970), superseded on other grounds by Celotex Corp. v. Catrett, 477 U.S. 317 (1986). Therefore, BSC's Motion on the plaintiff's claim of strict liability for design defect is DENIED.
4. Failure to Warn
Texas, like many jurisdictions, has adopted the learned intermediary doctrine. Under this doctrine, a plaintiff must establish two elements: "(1) the warning was defective; and (2) the failure to warn was a producing cause of the plaintiff's condition or injury." Porterfield v. Ethicon, Inc., 183 F.3d 464, 468 (5th Cir. 1999) (applying Texas law).
Under Texas law, causation—the second element—must be proven by showing "a proper warning would have changed the decision of the treating physician." Ackermann v. Wyeth Pharm., 526 F.3d 203, 208 (5th Cir. 2008) (quoting Dyer v. Danek Med., Inc., 115 F. Supp. 2d 732, 741 (N.D. Tex. 2000)). In other words, the plaintiff must show "that but for the inadequate warning, the treating physician would have not used or prescribed the product." Id. (quoting Dyer, 115 F. Supp. 2d at 741). If a physician, as the learned intermediary, does not testify that he or she would not have used or prescribed the product, the causal chain is broken, the plaintiff cannot show causation, and the failure to warn claim fails.
BSC argues that the implanting physician, Dr. Teri Baumgartner, was adequately warned of the risks associated with the Obtryx before implanting it in Ms. Twombly, and that the plaintiff cannot establish causation. The record does not include any evidence that Dr. Baumgartner would not have used or prescribed the products if the warnings were different. Therefore, the plaintiff cannot establish causation, and her failure to warn claim fails. Because the failure to warn claim fails for lack of causation, I need not address the adequacy of the warnings. See Celotex, 477 U.S. at 322-23. Accordingly, BSC's motion for summary judgment on the failure to warn claim is GRANTED.
B. Negligence
"Before a negligence theory can be utilized in a products liability case, there must be proof of a defect in the product." Toshiba Int'l Corp. v. Henry, 152 S.W.3d 774, 785 (Tex. App. 2004); see also Garrett v. Hamilton Standard Controls, Inc., 850 F.2d 253, 257 (5th Cir. 1988) ([A] manufacturer logically cannot be held liable for failing to exercise ordinary care when producing a product that is not defective . . . ."). Proving the plaintiff's negligent manufacturing claim—like the plaintiff's strict liability for manufacturing defect claim—requires proof of a defect. The court granted summary judgment on the plaintiff's strict liability for manufacturing defect and failure to warn claims because the plaintiff did not demonstrate a defect; therefore, the court also GRANTS the defendant's Motion with respect to the plaintiff's negligent manufacturing and negligent failure to warn claims.
The defendant has not presented arguments with respect to the negligent design defect claim beyond those I have already rejected. Accordingly, BSC's Motion as to the negligent design defect claim is DENIED.
C. Breach of Express and Implied Warranties
I previously held that the plaintiff's warranty claims are time barred by the statute of limitations and dismissed these claims. (Mem. Op. & Order [Docket 90], at 8). BSC's Motion on the plaintiff's claims for breach of express and implied warranty are DENIED as moot.
IV. Conclusion
For the reasons discussed above, it is ORDERED that BSC's Motion [Docket 38] is GRANTED IN PART with respect to the plaintiff's claims of strict liability for manufacturing defect, strict liability for failure to warn, negligent manufacturing, and negligent failure to warn; DENIED IN PART with respect to the plaintiff's claims of strict liability for design defect and negligent design; and DENIED as moot as to the claims for breach of express and implied warranty.
The Court DIRECTS the Clerk to send a copy of this Order to counsel of record and any unrepresented party.
ENTER: May 2, 2016
/s/_________
JOSEPH R. GOODWIN
UNITED STATES DISTRICT JUDGE
Restatement (Second) of Torts § 402A cmt. k (Am. Law Inst.) (1965).