Summary
rejecting taxpayer claim that design computer qualified for exemption under § 12-412 because functions performed by computer were "preliminary to the manufacturing process, rather than `used directly' therein"
Summary of this case from Sikorsky Aircraft Corp. v. Comm. of Revenue ServsOpinion
(13760)
The plaintiff appealed from the judgment of the trial court upholding a deficiency assessment of sales and use taxes by the defendant commissioner of revenue services on a design computer used in the plaintiff's manufacturing business. The plaintiff claimed that because the computer was used to operate a milling machine, it qualified for the statutory ( 12-412) exemption applicable to machinery used directly in a manufacturing process. Held that the trial court did not err in determining, as a mixed question of fact and law, that the equipment was not used directly in the manufacturing process; the sole link between the computer and the milling machine consisted of a physically discrete imprinted paper tape, and the exemption claimed is available only upon a showing that the machinery in question is used in one of a series of production activities that results in a substantial change in the form, composition or character of personal property.
Argued October 31, 1989
Decision released January 2, 1990
Appeal from a deficiency assessment of sales and use tax on certain of the plaintiff's personal property, brought to the Superior Court in the judicial district of Hartford-New Britain at Hartford and tried to the court, Freed, J.; judgment for the defendant, from which the plaintiff appealed. No error.
Daniel Shepro, for the appellant (plaintiff).
Jonathon L. Ensign, assistant attorney general, with whom, on the brief, was Clarine Nardi Riddle, attorney general, for the appellee (defendant).
The sole issue in this tax appeal is whether the plaintiff Plastic Tooling Aids Laboratory, Inc. (taxpayer), has established that its design computer qualifies for an exemption as "machinery used directly in a manufacturing . . . process" in accordance with General Statutes 12-412 (34). After a determination by the defendant commissioner of revenue services (commissioner) that the taxpayer was liable for a deficiency assessment, the taxpayer appealed to the trial court pursuant to General Statutes 12-422. The trial court concluded that the commissioner should prevail. We transferred the taxpayer's appeal from this adverse judgment to the Supreme Court in accordance with Practice Book 4023. We find no error.
The facts are undisputed. The taxpayer uses a milling machine to produce aluminum and steel injection molds according to predetermined specifications. To assist in this process, the taxpayer in 1982 bought a computer known as a CAD/CAM, which stands for "computer aided design/computer aided manufacturing." The CAD/CAM translates information from blueprints into numeric design specifications that, at the time relevant to this assessment, were encoded on a paper tape. Upon its completion, the tape was physically removed from the CAD/CAM and inserted into a milling machine. While previously a personal operator had controlled the milling machine's preparation of a mold, the tape produced by the CAD/CAM gave the milling machine the necessary instructions without further human intervention.
The taxpayer's purchase of the CAD/CAM would obligate it to pay a Connecticut sales and use tax, General Statutes 12-411, unless this transaction qualifies for a statutory exemption under General Statutes 12-412. Subsection 12-412 (34) specifically exempts "[s]ales of . . . machinery used directly in a manufacturing . . . process" but not sales of "office equipment or data processing equipment other than numerically controlled machinery used directly in the manufacturing process." Departmental regulations define both "manufacturing" and "manufacturing production process."
General Statutes 12-412 (34) provides: "EXEMPTIONS. Taxes imposed by this chapter shall not apply to the gross receipts from the sale of and the storage, use or other consumption in this state with respect to the following items . . . . "(34) Machinery used in manufacturing or agricultural production. Sales of and the storage, use or other consumption of machinery used directly in a manufacturing or agricultural production process. The word `machinery' as used in this subsection means the basic machine itself, including all of its component parts and contrivances, such as belts, pulleys, shafts, moving parts, operating structures and all equipment or devices used or required to control, regulate or operate the machinery, but excluding office equipment or data processing equipment other than numerically controlled machinery used directly in the manufacturing process."
Section 12-42-11b (a) (10) of the Regulations of Connecticut State Agencies provides: `Manufacturing' shall mean the performance as a business of an integrated series of operations which places personal property in a form, composition or character different from that in which it was acquired for sale in the regular course of business by the manufacturer. The change in form, composition or character must be a substantial change, and it must result in a transformation of property into a different product having a distinctive name, nature and use. Operations such as compounding or fabricating are illustrative of the types of operation which may result in such a change. `Manufacturing' is an activity which shall occur solely at an industrial plant." Section 12-426-11b (a) (11) of the Regulations of Connecticut State Agencies provides: `Manufacturing production process' shall mean one of a series of production activities, beginning with the movement of the raw materials after their receipt, inspection and storage, to the first production machine and ending with the completion of the finished product, including any packaging operations, for its sale to the ultimate consumer. `Manufacturing production process' shall not include any activities prior to the first production stage (such as collecting, weighing and storing raw materials) or any activities following the last production stage (such as casing, loading or delivering to the consumer). `Manufacturing production process' shall occur solely at an industrial plant."
The trial court determined that the applicability of the 12-412 exemption to the taxpayer's CAD/CAM purchase had raised a question that was not free from ambiguity, and that the taxpayer bore the burden of persuasion on resolving this ambiguity so as to establish its right to claim the exemption. From this vantage point, the court concluded that the CAD/CAM was "data processing equipment [which functioned as] numerically controlled machinery," but that the taxpayer had not shown that the equipment was "used directly in the manufacturing process." Accordingly, the court ruled that judgment should enter for the commissioner in an amount to which the parties had previously stipulated.
On appeal, the taxpayer maintains that the trial court erred in interpreting 12-412 (34) to conclude that the CAD/CAM was (1) not "used directly in the manufacturing process," and (2) taxable data processing equipment rather than "equipment or devices used . . . to control, regulate or operate the machinery." In this case, there is no functional distinction between these two claims of error. Even if the taxpayer were correct that the CAD/CAM should properly have been denominated as machinery rather than as data processing equipment, the taxpayer's claim for an exemption would still have to satisfy the overarching requirement of 12-412 (34) that the machinery was "used directly in a manufacturing . . . process." Because the sole link between the CAD/CAM and the milling machine consisted of its production of a physically discrete imprinted tape, the issue is whether the taxpayer's CAD/CAM was "used directly" in the taxpayer's manufacturing process. For this taxpayer, that issue is the same however the CAD/CAM is characterized.
We begin our discussion of this issue by noting the principles of statutory construction that govern the availability of a tax exemption. First, statutes that provide exemptions from taxation are a matter of legislative grace that must be strictly construed against the taxpayer. Second, any ambiguity in the statutory formulation of an exemption must be resolved against the taxpayer. Third, the taxpayer must bear the burden of proving the error in an adverse assessment concerning an exemption. Stop 'N Save, Inc. v. Department of Revenue Services, 212 Conn. 454, 462, 562 A.2d 512 (1989); Harper v. Tax Commissioner, 199 Conn. 133, 142, 506 A.2d 93 (1986); The B.F. Goodrich Co. v. Dubno, 196 Conn. 1, 8-9, 490 A.2d 991 (1985).
Applying these principles in this case, we conclude that the trial court was not clearly erroneous in determining, as a mixed question of fact and law, that the taxpayer's CAD/CAM was not "used directly in a manufacturing process." The CAD/CAM's end product, at the time of this litigation, was an encoded paper tape. The CAD/CAM had no direct link, electronic or otherwise, with the taxpayer's milling machine and did not directly transform the raw material that the milling machine made into injection molds. Once the milling machine received the encoded tape containing instructions from the CAD/CAM, a separate unit, known as a DAC interface control, was required to convey these instructions electronically to the milling machine for operational purposes.
Although the taxpayer does not dispute the accuracy of this factual recitation, it contends that anything that affects the process of the production line as a whole can come within the category of "used directly in a manufacturing process." The taxpayer maintains that it was not required to show that the CAD/CAM directly affected the raw material that its milling machine would ultimately manufacture into molds. Comparing the regulation for tax exemptions for tools with that governing tax exemptions for machinery, it notes that only tools are expressly required to be used "in the operation of machines for the purpose of producing a direct effect upon the product being manufactured," (emphasis added); Regs., Conn. State Agencies 12-426-11b (a) (13); while machinery may be used in a "manufacturing production process" in "any one of a series of production activities." Regs., Conn. State Agencies 12-426-11b (a) (11). The taxpayer reminds us that this court, in United Aircraft Corporation v. Connelly, 145 Conn. 176, 186, 140 A.2d 486 (1958), held that X-ray films, testing chemicals, oil and gasoline qualified for the exemption contained in an earlier sales tax statute, General Statutes (Cum. Sup. 1955) 1167d, for "personal property . . . used directly . . . in the process of the manufacture of tangible personal property to be sold," even though the plant manufactured and sold airplanes. Thereafter, in Ziperstein v. Tax Commissioner, 178 Conn. 493, 496, 423 A.2d 129 (1979), we held that electricity used in the process of manufacturing ice milk was used and consumed "`directly . . . in an industrial plant in the actual fabrication of the finished product to be sold.'" Id., quoting General Statutes (Rev. to 1977) 12-412 (r). We find these arguments unpersuasive both as a matter of fact and as a matter of law.
As a factual matter, on the present record the trial court was entitled to find that the absence of any direct linkage between the CAD/CAM and the milling machine served to defeat the taxpayer's claim to the statutory exemption. The production of encoded tape could reasonably be found to be akin to the production of blueprints or other design documents, all of which are preliminary to the manufacturing process, rather than "used directly" therein.
Other courts have held that computers were not used directly in manufacturing when they produced: photographs for customer approval prior to production; Rhode Island Lithograph Corporation v. Clark, 519 A.2d 589, 591 (R.I. 1987); software resulting in the production of magnetic tapes; Interactive Information Systems, Inc. v. Limbach, 18 Ohio St.3d 309, 311, 480 N.E.2d 1124 (1985); production schedules for the manufacturing process; W. N. Dambach, Inc. v. Commonwealth of Pennsylvania, 488 A.2d 96, 98-99 (Commw. Ct. 1985); compilations of plant information and instructions; Commonwealth v. Kuhlman Corporation, 564 S.W.2d 14, 16 (Ky. 1978); and magnetic tapes containing customer and payroll information. Wesleyan, University Press, Inc. v. Donahue, 8 Ohio St.2d 4, 5, 221 N.E.2d 590 (1966). Although each of these cases interprets statutes that differ in some particulars from our own, they confirm the significance of a distinction between ancillary functions that facilitate the operation of an industrial plant and the transformation of personal property that constitutes the manufacturing process.
As a legal matter, the taxpayer's argument overlooks the regulatory changes that have, since 1980, imposed additional limitations upon the exemption provided in 12-412 (34). In Connecticut Water Co. v. Barbato, 206 Conn. 337, 343, 537 A.2d 490 (1988), we concluded that the regulation presently defining "manufacturing"; Regs., Conn. State Agencies 12-426-11b (a) (10); validly requires a taxpayer claiming an exemption for machinery "used directly in a manufacturing . . . process" to prove a direct connection with a process that results in the substantial transformation of the "`form, composition or character'" of personal property. Id., 343 n. 6. This circumscribed regulatory definition of "manufacturing" narrows the scope of the statutory exemption for machinery "used directly in a manufacturing . . . process" to one that is less inclusive than it was when United Aircraft Corporation and Ziperstein were decided. Id. The regulatory definition of "manufacturing" also limits the scope of "manufacturing production process" in 12-426-11b (a) (11) of the Regulations of Connecticut State Agencies. Read conjointly, these regulations make the statutory exemption available only upon a showing that the machinery at issue is used in "one of a series of production activities" that results in a substantial change in the "form, composition or character" of personal property. So construed, the regulations governing the exemption for machinery are not, in principle, inconsistent with the regulation defining the exemption for tools. In both cases, the statutory exemption turns upon effecting a change in the product being manufactured.
The taxpayer has not challenged the validity of the regulations promulgated to clarify the exemptions provided by General Statutes 12-412. Connecticut Water Co. v. Barbato, 206 Conn. 337, 344, 537 A.2d 490 (1988); Texaco Refining Marketing Co. v. Commissioner, 202 Conn. 583, 600, 522 A.2d 771 (1987).
Furthermore, at oral argument, the taxpayer conceded that the statutory exemption construed in United Aircraft Corporation v. Connelly, 145 Conn. 176, 140 A.2d 486 (1958), arose under a different sales and use tax than the one presently in effect.
We therefore agree with the trial court's conclusion, insofar as it was based on a construction of the applicable statute and regulations, that the taxpayer has failed to prove that its CAD/CAM was "used directly in a manufacturing process."