Summary
In Dowdell v. Lackawanna Steel Co. (198 N.Y. 362) it was held that the use in the operation of a locomotive crane of safety devices to prevent its tipping over owing to the weight of the load it was handling or to the unevenness of the track, was a detail of the work and that negligence could not be imputed to the master for not having made and promulgated a rule with respect to when the safety devices should be used.
Summary of this case from Stewart v. Hinkle Iron Co.Opinion
Argued April 8, 1910
Decided April 26, 1910
Thomas A. Sullivan and Frederick G. Bagley for appellant.
Evan Hollister for respondent.
The scene of the accident where the plaintiff received his injuries, for which he seeks to recover damages in this action, was at the defendant's steel plant, near the city of Buffalo, at West Seneca, on October 23rd, 1902. The plaintiff, while assisting in operating a device known as a "locomotive crane," was injured by its capsizing and falling upon him.
A proper appreciation of the situation requires a brief description of the device known as a locomotive crane. A witness for the plaintiff was permitted to read from the manufacturer's circular a description of this crane: "The frame work of this car is twenty-four feet, one and one-half inches long; with nine feet, four inches, constructed of steel. * * * In working order the crane weighs approximately seventy-five tons, distributed over a wheel base of sixteen feet."
It further appears that upon the deck of this car is a cabin in which were an engine and machinery for operating a steel jib or boom. This cabin rotated on a circle so that the boom could pick up material on either side of the track. The boom was so arranged that it could be lifted from a horizontal to a vertical position by cable and pulley, and in that way its radius could be lengthened or shortened as circumstances might require in unloading or picking up castings or other heavy articles for transportation. The car was also equipped with outriggers to strengthen it when making heavy lifts, acting as a counterbalance. The car was also provided with a device known as a "clamp," which was designed to grasp the rail and hold the car in an upright position on the track when lifting heavy steel castings.
On the day of the accident, October 23rd, 1902, the plaintiff was engaged in operating this locomotive crane with a number of other men, his place being under the assistant foreman. It appears that he had been working in this position from the tenth of the previous September. It also appears that the defendant steel company was engaged at this time in the erection of its very extensive plant, and among other work it was building what is known as the "Bessemer Steel Mill," a structure three hundred and fifty feet in length. The track upon which the crane was run was of a temporary character, as were all the tracks on the property of the defendant, where at this particular time the work of construction was very general. The track on which the crane was operated on the day in question ran parallel with the side of the Bessemer steel mill and a sufficient distance therefrom to enable it to deliver at the main door various castings and heavy articles of steel.
At the time of the accident the crane crew were engaged in delivering what was known as a "steel bedplate" that weighed somewhere from four to six tons. Immediately before the accident the plaintiff had been engaged with other men in putting down planks at the point of the proposed delivery of this casting to receive the same. When the crane approached opposite this point of delivery the men retired hastily in order to be in a place of safety when the casting was lowered. A witness who was engaged in operating the crane at this particular time said: "When we got to this place where the accident occurred the crane was stopped. I got orders to swing the crane, that is swing the casting over to the left. That would be between the building * * * and the track on which the crane was operated. * * * In swinging it around the crane naturally moved slowly. While I was swinging it around the crane capsized. The crane and the casting had reached an angle of about forty-five degrees with the car when it capsized."
The plaintiff was caught under a certain portion of the wreckage and thereby received the injuries for which he sues.
This is a common-law action, and the plaintiff insists that the defendant is liable to respond in damages for the reason that it failed to place competent men in charge of the locomotive crane; also in failing to promulgate proper rules by which the men were to be governed while operating the crane; also that the defendant failed to make and keep the track upon which the crane was operated in a reasonably safe condition. It was proved that the rail of the track nearest the building in course of construction was from two to five inches lower than the other rail.
The dismissal of the complaint on the last trial was based upon the legal proposition that the operation of this crane was a detail of the work, and that for any injuries received by the workmen accustomed to operate the same the master was not liable.
It was clearly proved that the employees engaged in operating this obviously dangerous device were furnished with outriggers to counterbalance the weight of heavy castings that were being moved by the crane, and also by a clamp that could be secured to the rail, thereby holding the car in an upright position. James Connery, a witness sworn on behalf of the defendant, testified that he was operating the crane at the time of the accident. Under cross examination he stated as follows: "When I speak about outriggers, I mean by that there were four I-beams, two on each end of the car. They were the length of the car and operated on rollers. * * * Their height is about four inches, with a flange on top and a flange on the bottom. They roll out of the bottom or come from rollers out of sheaths that are on the ends of the car. There are outriggers on both ends of the car. It was their purpose in making a heavy lift to strengthen the crane; in other words, you put the outriggers out and block them up; then the crane can't tip over, not very well."
The use of these I-beams was fully explained to the effect that heavy blocks or weights were placed thereon, adding greatly to the stiffness or stability of the car. This device in connection with the clamp already described were furnished to the crew of the car in order to prevent it from capsizing when lifting a very heavy weight. It clearly appears that the crew operating this crane were engaged in passing from one part of the defendant's plant to another, and their duties were manifestly a detail of the work, and the master having furnished them with appliances that would prevent the capsizing of the car, if prudently and seasonably used, has discharged his full duty in the premises. If the weight was great, or the track uneven, or the soil beneath the track in any degree soft or yielding, it was for the operators of the crane to determine when to use these safety devices. It was proved that just prior to the accident there was a discussion between certain members of the crew as to the propriety of attaching the clamp to the rail, but it was determined by the conductor, or some one in authority, that it was unnecessary.
The master is bound to furnish reasonably safe implements for the use of his servants, and a reasonably safe place of employment, considering the nature of the employment itself. ( Cullen v. Norton, 126 N.Y. 1, 5.) In the case at bar the reasonably safe place of employment, considering the nature of the employment itself, was on and about the crane, and to use the manifestly efficient devices provided for the safety of the crew. The failure to do so, followed by an accident killing or injuring one or more of the crew, is a result for which the master cannot be held liable.
The judgment appealed from should be affirmed, with costs.
GRAY, WERNER, WILLARD BARTLETT, HISCOCK and CHASE, JJ., concur; CULLEN, Ch. J., dissents.
Judgment affirmed.